java-programmer >>Linking hibernate ejb3 persistence units

Linking hibernate ejb3 persistence units

Index ‹ java-programmer

Previous
- 2
 - /Z4 Almost FREE MONEY !! /Z4MAKE MONEY!!!
 
 MAKE THOUSANDS!!!
 
 I found this on a bulletin board and decided to try it: I don't care about
 the useless pre-fabricated crap this message usually says. All I say is, it
 works. Continue pre-fab crap.
 
 WELL GUESS WHAT!!!
 
 Within seven days, I started getting money in the mail!! I
 was shocked!! I figured it would end soon, but the money just kept
 coming in. In my first week, I made about $25.00. By the end of the second
 week I had made a total of more than $1000.00!!
 
 Let me tell you how this works and most important, why it works..........
 also make sure you print this out NOW, so you can get the information off
 of it, as you will need it. I promise you that if you follow the directions
 exactly that you will start making more money than you thought possible by
 doing something
 so easy!!
 
 Suggestion: Read this entire message carefully!! (Print it out or download
 it)
 
 Follow the simple directions and watch the money come in!! It's easy.
 It's legal. And, your investment is only $6.00 (Plus postage) !!!
 
 You can use any currancy as people can always change it..
 
 IMPORTANT:
 
 This is not a rip-off, it is decent; it's legal; and it is virtually no
 risk - it really works!! If all the following instructions are adhered to,
 you will receive extraordinary dividends.
 
 PLEASE NOTE:
 
 Please follow the directions EXACTLY, and $50,000 or more can be yours
 in 20 to 60 days. This program remains successful because of the honesty
 and integrity of the participants. Please continue its success by carefully
 adhering to the instructions. You will now become apart of the Mail Order
 business.
 You are in the business of developing Mailing Lists. Many large corporations
 are happy to pay big bucks for quality lists. However, the money made from
 the
 mailing lists is secondary to income which is made from people like you
 and me asking to be included in that list. Here are the four easy steps to
 success.
 
 STEP ONE:
 
 Get six separate pieces of paper and write the following on
 each piece of paper "PLEASE PUT ME ON YOUR MAILING LIST."
 Now get 6 U.S. $1.00 bills and place ONE inside of EACH of the six pieces
 of paper so the bill will not be seen through the envelope (to prevent
 thievery). Next, place one paper in each of the six envelopes and seal them.
 You now should have six sealed envelopes, each with a piece of paper stating
 the above phrase, your name and address, and a $1.00 bill. What you are
 doing is creating a service.
 
 THIS IS ABSOLUTELY LEGAL!!!!!
 
 You are requesting a legitimate service and you are paying for it!! Like
 most of us I was a little skeptical and little worried about the legal
 aspects of it all. So I checked it out with the U.S. Post Office
 (1-800-238-5355)
 and they confirmed that it is indeed legal!!
 
 Mail the six envelopes to the following addresses:
 
 Matthew Dutton
 46 Hayworth St
 Point Vernon, Hervey Bay
 QLD, 4390
 Australia
 
 R. Visser
 P.O. Box 274
 Nobby Beach
 QLD, 4218
 Australia
 
 S. Phillips
 77 Manly Drive
 Robina, QLD 4226
 Australia
 
 Chris Pittman
 7651 Abigail Glen Dr.
 Charlotte, NC 28212
 USA
 
 Mike Vango
 29 Pebblewood Ave
 Scarborough, ON M1V-2A7
 Canada
 
 C. Wehler
 137 Sara Rd
 St. Marys, PA 15857
 USA
 
 STEP TWO:Now take the #1 name off the list that you see above, move the
 other names up (six becomes 5, 5 becomes 4, and etc.) and add YOUR NAME as
 number 6 on the list.
 
 STEP THREE:
 Change anything you need to but try to keep this article as close to
 original as possible. Now post your amended article to at least 200 news
 groups. : (I think there are close to 24,000 groups) All you need is 200,
 but
 remember, the more you post, the more money you make!! This is perfectly
 legal!! If you have any doubts, refer to Title 18 Sec. 1302 & 1341 of the
 Postal Lottery laws. Keep a copy of these steps for yourself and whenever
 you need money, you can use it again, and again. PLEASE REMEMBER that this
 program remains successful because of the honesty and integrity of the
 participants and by their carefully adhering to directions. Look at it this
 way. If you were of integrity, the program will continue and the money that
 so many others have received will come your way.
 
 NOTE: You may want to retain every name and address sent to you,> either on
 a computer or hard copy and keep the notes people send you.
 This VERIFIES that you are truly providing a service. (Also, it might be
 a good idea to wrap the $1 bill in dark paper to reduce the risk of mail
 theft). So, as each post is downloaded and the directions carefully
 followed, all members will be reimbursed for their participation as a List
 Developer with one dollar each. Your name will move up the list
 geometrically so that when your name reaches the #1 position you will be
 receiving thousands of dollars in CASH!!! What an opportunity for only $6.00
 ( $1.00 for each of the first six people listed above) Send it now, add your
 own name to the list and you're in business!!!
 
 *****DIRECTIONS FOR HOW TO POST TO NEWS GROUPS!!!*****
 
 STEP ONE: You do not need to re-type this entire letter to do your own
 posting. Simply put your cursor at the beginning of this letter and drag
 your cursor to the bottom of this document, and select 'copy' from the edit
 menu. This will copy the entire letter into the computer's memory.
 
 STEP TWO:
 Open a blank 'notepad' file and place your cursor at the top
 of the blank page. From the 'edit' menu select 'paste'. This will paste a
 copy of the letter into the notepad so that you will add your name to the
 list.
 
 STEP THREE:
 Save your new notepad file as a text file. If you want to do your posting
 in different settings, you'll always have this file to go back to.
 
 STEP FOUR:
 You can use a program like "postXpert" to post to all the newsgroups at
 once. You can find this program at <<http://www.download.com>>.
 
 Use Netscape or Internet Explorer and try searching for various new
 groups (on- line forums, message boards, chat sites, discussions.)
 
 STEP FIVE:
 Visit message boards and post this article as a new message by
 highlighting the text of this letter and selecting paste from the edit menu.
 Fill in the subject, this will be the header that everyone sees as they
 scroll through the list of postings in a particular group, click the post
 message button. You're done.
 
 Congratulations!!!!!!
 
 THAT'S IT!! All you have to do, and It Really works!!!
 
 BEST WISHES ...
 
 ouYj\
- 3
 - pass by referenceLew wrote:
 > Lew wrote:
 >> You really are an apologist for imprecision here.
 >
 > Andreas Leitgeb wrote:
 >>> Is this supposed to be more or less insulting than
 >>> my "language police" or perhaps same level?
 >
 > No, it's a literal description of actions. I have not known "apologist"
 > to be considered an insult heretofore, and you have explicitly presented
 > arguments as to when and why imprecise expression of the concept is
 > appropriate. How is that insulting?
 >
 > It's not like I called you stupid or any other pejorative. I just gave
 > a literal description of your behavior.
 
 Andreas Leitgeb wrote:
 >> And in what way is "language police" anything else than the same?
 
 Hey, I am not the one who called either phrase an insult.
 
 My point was that "simply applying pejoratives to the truth will not make it
 less true". By labeling the apologists for precision in a thread devoted to
 the precise definition "language police", you were diverting the issue.
 
 By coming back at me to call my comments an insult, you were again diverting
 the issue by resorting to superfluous labels.
 
 --
 Lew
- 3
 - java applet signingHi all,
 I have an applet that needs to be signed before deploying it.I have
 already obtained a digital id from verisign, imported into my keystrore
 and I can sigh the applet.
 I however have not able to export the certificate to a file so that I
 can put it in the build scripts ,enabling anyone on any machine to
 simply check out code and certificate ,and build it.
 Has anyone experience regarding this?any help will be appreciated.
- 3
 - Limits on number of Locks/Monitors (a.k.a. java.lang.Object)Hi all,
 
 I know that under Unix/Linux, there is a max number of
 synchronization objects (e.g. semaphores etc.) that one
 can create.
 
 I assume that likewise, there is a max number of mutexes
 and conditional vars that one can create in a threading
 environment such as when using Pthreads under Solaris.
 
 Now, each java Object provides the Monitor functionality,
 and I can easily create several thousand java.lang.Object(s)
 in the JVM given sufficient memory.
 
 Given the above, it seems that I can easily create more
 synchronization objects (java objects) than the underlying
 threading system supports in Java/JVM.
 
 Is this true ? If so, how does Java/JVM manage to accomplish this ?
 
 Please, someone drop me a clue!
 
 Thanks,
 /Meh
- 3
 - Omega Deville 18kt Yellow Gold Midsize Watch 7120.14 ReplicaOmega Deville 18kt Yellow Gold Midsize Watch 7120.14 Replica, Fake,
 Cheap, AAA Replica watch
 
 Omega Deville 18kt Yellow Gold Midsize Watch 7120.14 Link :
 http://www.aaa-replica-watch.com/Omega_7120.14.html
 
 Buy the cheapest Omega Deville 18kt Yellow Gold Midsize Watch 7120.14
 in toppest Replica . www.aaa-replica-watch.com helps you to save
 money! Omega-7120.14 , Omega Deville 18kt Yellow Gold Midsize Watch
 7120.14 , Replia , Cheap , Fake , imitation , Omega Watches
 
 Omega Deville 18kt Yellow Gold Midsize Watch 7120.14 Information :
 
 Brand : Omega Watches (http://www.aaa-replica-watch.com/
 Replica_Omega.html )
 Gender : Unisex
 Model : Omega-7120.14
 Case Material : 18kt Yellow Gold
 Case Diameter : 7120.14, 7120.14.00, 7120-14, 7120-14-00, 7120/14,
 712014, 7120
 Dial Color : Ivory
 Bezel : Fixed
 Movement : Quartz
 Clasp : 18kt Yellow Gold
 Water Resistant : 30m/100ft
 Crystal : Scratch Resistant Sapphire
 Our Price : $ 268.00
 
 Availability: Contact Us For Availability Omega Deville 18kt Yellow
 Gold Midsize Watch 7120.14 18kt yellow gold case and bracelet.
 Champagne dial. Date displays at 3 o'clock position. Gold hands and
 hour markers. Quartz movement. Water resistant at 30 meters (100
 feet). Omega Deville 18kt Yellow Gold Midsize Watch 7120.14 Omega
 Deville 18kt Yellow Gold Midsize Watch 7120.14 Brand OmegaSeries Omega
 DeVilleGender UnisexCase Material 18kt Yellow GoldDial Color
 IvoryBezel FixedMovement QuartzClasp Domed Anti-reflective Scratch
 Resistant SapphireBracelet 18kt Yellow GoldWater Resistant 30m/
 100ftCrystal Scratch Resistant SapphireWarranty Warranty service for
 this watch will be offered through Haob2b.com and not the
 manufacturer. Omega watches have a 2 year Haob2b.com warranty. Please
 click here for additional watch warranty information.Item Variations
 7120.14, 7120.14.00, 7120-14, 7120-14-00, 7120/14, 712014,
 7120Additional Information Date Displays at 3 O'clock PositionOmega
 watches have been a standard for quality and excellence for over 150
 years, when the company began as Switzerland's first watch
 manufacturer. When elegance and strength come together to form an
 extraordinary timepiece, the result can only be an Omega wristwatch.
 Omega watches are proud to be endorsed by many of the world's leading
 athletes and celebrities, the most prominent being Pierce Bronson as
 James Bond and Cindy Crawford. Haob2b is proud to offer a full line of
 Omega watches, featuring Omega Constellation, Omega Seamaster, Omega
 Aqua Terra, Omega Speedmaster, Omega double eagle, Omega Broad Arrow,
 and Omega Co-Axial at competitive prices.Omega Deville 18kt Yellow
 Gold Midsize Watch 7120.14 is brand new, join thousands of satisfied
 customers and buy your Omega Deville 18kt Yellow Gold Midsize Watch
 7120.14 with total satisfaction . A Haob2b.com 30 Day Money Back
 Guarantee is included with every Omega Deville 18kt Yellow Gold
 Midsize Watch 7120.14 for secure, risk-free online shopping.
 Haob2b.com does not charge sales tax for the Omega Deville 18kt Yellow
 Gold Midsize Watch 7120.14, unless shipped within New York State.
 Haob2b.com is rated 5 stars on the Yahoo! network.
 
 Omega Deville 18kt Yellow Gold Midsize Watch 7120.14 Replica, With the
 mix of finest craftsmanship and contemporary styling, not only does it
 reflect the time but also care you put into looking good. choose one
 to promote your quality and make yourself impressive among people
 
 Thank you for choosing www.aaa-replica-watch.com as your reliable
 dealer of quality waches including Omega Deville 18kt Yellow Gold
 Midsize Watch 7120.14 . we guarantee every watch you receive will be
 exact watch you ordered. Each watch sold enjoy one year Warranty for
 free repair. Every order from aaa-replica-watches is shipped via EMS,
 the customer is responsible for the shipping fee on the first order,
 but since the second watch you buy from our site, the shipping cost is
 free. Please note that If the total amount of payment is over
 $600(USD), the customer is required to contact our customer service
 before sending the money in case failed payment. If you have any other
 questions please check our other pages or feel free to email us by
 email***@***.com.
 
 The Same Omega Watches Series :
 
 Omega DeVille Ladies Watch 4870.31.01 :
 http://www.aaa-replica.com/Omega_4870.31.01.html
 
 Omega DeVille Co-Axial Ladies Watch 4581.31 :
 http://www.aaa-replica.com/Omega_4581.31.html
 
 Omega DeVille Co-Axial Chronograph Mens Watch 4841.20.32 :
 http://www.aaa-replica.com/Omega_4841.20.32.html
 
 Omega DeVille Co Axial Chronograph Power Reserve Watch 4632.80.33 :
 http://www.aaa-replica.com/Omega_4632.80.33.html
 
 Omega DeVille Co-Axial Power Reserve Mens Watch 4532.40 :
 http://www.aaa-replica.com/Omega_4532.40.html
 
 Omega DeVille Co-Axial GMT Mens Watch 4533.51 :
 http://www.aaa-replica.com/Omega_4533.51.html
 
 Omega DeVille Co-Axial GMT Mens Watch 4533.50 :
 http://www.aaa-replica.com/Omega_4533.50.html
 
 Omega DeVille Co-Axial GMT Mens Watch 4533.31 :
 http://www.aaa-replica.com/Omega_4533.31.html
 
 Omega DeVille Co-Axial Chronograph Mens Watch 4541.50 :
 http://www.aaa-replica.com/Omega_4541.50.html
 
 Omega DeVille Co-Axial Mens Watch 4531.51 :
 http://www.aaa-replica.com/Omega_4531.51.html
 
 Omega DeVille Co Axial Mens Watch 4531.50 :
 http://www.aaa-replica.com/Omega_4531.50.html
 
 Omega Speedmaster Mens Watch 3211.31 :
 http://www.aaa-replica.com/Omega_Speedmaster_Mens_Watch_3211_31.html
- 4
 - Gimp invocation from JavaI have the following problem when I try to invoke a shell script from a
 running Java program. When using the script from the command line, all
 works well. The script in question is a small batch file that simply
 invokes GIMP to execute a pre-defined Scheme program that watermarks
 and converts an image file.
 
 When invoked from a JVM instance, GIMP itself starts, reads and reads
 the script OK but then stops executing according to a process
 monitoring utility.
 
 Here's the Java snippet in question:
 
 import java.io.*;
 import java.util.*;
 import java.lang.*;
 
 public class Convert {
 private static void convert (String [] files, String targetDir) {
 int retV = 0;
 for (int i = 0; i < files.length; i++) {
 File file = new File (files [i]);
 String tmp = new String (file.getName ());
 String base = new String (tmp.substring (0, tmp.lastIndexOf
 (".")));
 String f = new String (targetDir + "/" + base);
 String fS = new String (f + "s");
 f += ".jpg";
 fS += ".jpg";
 File ff = new File (f);
 String pre = "";
 
 if (! file.canRead () || file.lastModified () > ff.lastModified ())
 {
 final String [] args = {"bash.exe", "-c", "cv.sh " + files [i]
 + " " + f + " " + fS};
 try {
 Process p = Runtime.getRuntime ().exec (args);
 retV = p.waitFor ();
 } catch (Exception e) {
 System.out.println (e.toString ());
 }
 } else {
 pre = ">";
 }
 System.out.println (pre + tmp + ":" + retV + "\n");
 }
 }
 public static class FFileFilter implements FilenameFilter {
 public boolean accept (File dir, String name) {
 return name.toLowerCase ().endsWith (".bmp");
 }
 }
 private static String [] getFiles (String dir) {
 File f = new File (dir);
 
 return f.list (new FFileFilter ());
 }
 public static void main(String[] args) {
 String [] files = getFiles (args [0]);
 
 convert (files, "img");
 }
 }
 
 The shell script in question (cv.sh):
 
 gimp-2.2 -c -i -d -b '(script-fu-process "'$1'" "'$2'" "'$3'")'
 
 I've tried separating the cmd-line arguments for the cv.sh
 invocation; the above format is the only version that works. The
 environment is the following: Win XP SP2, gimp 2.2.7, Cygwin bash
 2.05b.01, Sun jdk 1.5.0_02 as well as Eclipse 3.02 (I've tried both
 Java environments to no avail).
 
 Any thoughts?
 
 Cheers, Christoph
- 5
 - Ant API - Examples where? Please help.Hi all,
 
 I need to develop a series of classes (zip, unzip, ftp, scp, rsh and
 ssh) in java using the Ant API.
 
 But I can't find anything on this, any tutorials, any example code.
 I've searched the net, many books and I got almost nothing. Java
 source code i only get the "How to develop an Ant Task" thing.
 
 Does anyone know where can i get simple examples of using this in
 java?
 
 Thank you all.
- 8
 - applet slow downHi everyone,
 I have a Java applet that slows down to a crawl whenever the mouse
 is moved from within the drawing canvas to somewhere else. Has anybody
 seen this strange behaviour before, or know what might cause it?
 
 Thanks in advance for your help.
- 8
 - JMX, way to know if NotificationEmitter is alive?Hi, I'm facing a JMX problem,
 I'm working in an aplication that uses JMX to send update messages
 from a MBeanServer to several consoles.
 The architecture is: a MBeanServer that emits JMX Notifications and
 several Java-Web-Start-based console's applications that are
 NotificationListeners, registered as listeners of the MBean that emits
 the Notifications at the server side.
 I want to know if there is a way from the different consoles to check
 if the NotificationEmitter is alive and sending Notifications.
 
 Any idea?
 
 (please, don't answer that the way to know that the server is down is
 that you don't receive more Notifications)
 
 thanks,
 Kun
- 9
 - System icons on windowsOn Sep 7, 5:02 pm, Nuno <email***@***.com> wrote:
 > Hello,
 >
 > There is any way of retrieving from the system the icons associated to
 > the windows explorer files? Example .rar extension has a nice book
 > icon, how to retrieve this icon and use it on my application or any
 > other file?
 >
 > Nuno
 
 Google for icon extractors, or resource extractors... there're many
 free ones.
 
 If you have Visual Studio, you can open DLL or EXE file as Resource.
 Then you can save the icons to image files.
- 9
 - [ports-i386@pointyhat.freebsd.org: kaffe-1.1.7.r1_2 failed on i386 4]
 FYI; can you please investigate and/or report to the developers? If
 you are already aware of this problem but do not yet have a fix,
 please mark the port BROKEN in the appropriate case, so that users do
 not unexpectedly encounter it.
 
 See http://pointyhat.freebsd.org for the full log.
 
 Thanks,
 Kris
 
 ----- Forwarded message from User Ports-i386 <email***@***.com> -----
 
 X-Original-To: kkenn@localhost
 Delivered-To: email***@***.com
 X-Original-To: email***@***.com
 Delivered-To: email***@***.com
 Date: Tue, 30 May 2006 07:14:28 GMT
 From: User Ports-i386 <email***@***.com>
 To: freebsd+email***@***.com, email***@***.com
 Subject: kaffe-1.1.7.r1_2 failed on i386 4
 X-UIDL: \j##!=eJ!!O80!!J~+!!
 X-Bogosity: Ham, tests=bogofilter, spamicity=0.000000, version=1.0.2
 
 checking for sigaltstack... yes
 checking for madvise... (cached) yes
 checking for waitpid... yes
 checking for kill... yes
 checking for fork... yes
 checking for execve... yes
 checking for execvp... yes
 checking for sync... yes
 checking for fsync... yes
 checking for ftruncate... yes
 checking for atexit... yes
 checking for on_exit... no
 checking for vsnprintf... yes
 checking for snprintf... yes
 checking if va_list is an array... no
 checking for va_copy... no
 checking for __va_copy... no
 checking for declaration of select... yes
 checking for declaration of swab... yes
 checking for type of second parameter of scalb being int... no
 checking for ALSA CFLAGS...
 checking for ALSA LDFLAGS... -lasound -lm -ldl -lpthread
 checking for libasound headers version >= 1.0.1... not present.
 checking for snd_ctl_open in -lasound... no
 Useable version of ALSA not found.
 checking for esd-config... /usr/local/bin/esd-config
 checking for ESD - version >= 0.2.1... yes
 Information: Using native math library
 checking which extensions to include...
 checking if malloc debugging is wanted... no
 checking pthread.h usability... yes
 checking pthread.h presence... yes
 checking for pthread.h... yes
 checking for /proc/self/maps... no
 checking whether everything is installed to the same prefix... yes
 checking whether binary relocation support should be enabled... no
 checking how to run the C preprocessor... cc -E
 checking for path separator... :
 checking for directory separator... /
 configure: creating ./config.status
 config.status: creating Makefile
 config.status: creating project.xml
 config.status: creating project.properties
 config.status: creating config/Makefile
 config.status: creating external/Makefile
 config.status: creating external/gcc/Makefile
 config.status: creating external/gcc/zlib/Makefile
 config.status: creating external/gcc/fastjar/Makefile
 config.status: creating include/Makefile
 config.status: creating replace/Makefile
 config.status: creating kaffe/Makefile
 config.status: creating libraries/Makefile
 config.status: creating kaffe/jvmpi/Makefile
 config.status: creating kaffe/kaffevm/Makefile
 config.status: creating kaffe/kaffevm/intrp/Makefile
 config.status: creating kaffe/kaffevm/jit/Makefile
 config.status: creating kaffe/kaffevm/jit3/Makefile
 config.status: creating kaffe/kaffevm/gcj/Makefile
 config.status: creating kaffe/kaffevm/systems/Makefile
 config.status: creating kaffe/kaffevm/systems/unix-jthreads/Makefile
 config.status: creating kaffe/kaffevm/systems/oskit-pthreads/Makefile
 config.status: creating kaffe/kaffevm/systems/drops-l4threads/Makefile
 config.status: creating kaffe/kaffevm/systems/beos-native/Makefile
 config.status: creating kaffe/kaffevm/systems/unix-pthreads/Makefile
 config.status: creating kaffe/kaffevm/verifier/Makefile
 config.status: creating kaffe/kaffevm/kaffe-gc/Makefile
 config.status: creating kaffe/kaffevm/boehm-gc/Makefile
 config.status: creating kaffe/kaffevm/jni/Makefile
 config.status: creating kaffe/kaffe/Makefile
 config.status: creating kaffe/kaffeh/Makefile
 config.status: creating kaffe/xprof/Makefile
 config.status: creating kaffe/man/Makefile
 config.status: creating kaffe/scripts/Makefile
 config.status: creating kaffe/scripts/bat/Makefile
 config.status: creating kaffe/scripts/compat/Makefile
 config.status: creating libraries/javalib/Makefile
 config.status: creating libraries/javalib/awt-implementations/Makefile
 config.status: creating libraries/javalib/awt-implementations/kaffe/Makefile
 config.status: creating libraries/javalib/gmp-math/Makefile
 config.status: creating libraries/clib/Makefile
 config.status: creating libraries/clib/target/Makefile
 config.status: creating libraries/clib/target/generic/Makefile
 config.status: creating libraries/clib/target/Linux/Makefile
 config.status: creating libraries/clib/native/Makefile
 config.status: creating libraries/clib/io/Makefile
 config.status: creating libraries/clib/nio/Makefile
 config.status: creating libraries/clib/net/Makefile
 config.status: creating libraries/clib/zip/Makefile
 config.status: creating libraries/clib/math/Makefile
 config.status: creating libraries/clib/management/Makefile
 config.status: creating libraries/clib/security/Makefile
 config.status: creating libraries/clib/awt/Makefile
 config.status: creating libraries/clib/awt/X/Makefile
 config.status: creating libraries/clib/awt/qt/Makefile
 config.status: creating libraries/clib/awt/nano-X/Makefile
 config.status: creating libraries/clib/sound/Makefile
 config.status: creating libraries/clib/sound/alsa/Makefile
 config.status: creating libraries/clib/sound/common/Makefile
 config.status: creating libraries/clib/sound/esd/Makefile
 config.status: creating libraries/javalib/rebuildLib
 config.status: creating libraries/extensions/Makefile
 config.status: creating libraries/extensions/comm/Makefile
 config.status: creating libraries/extensions/comm/javalib/Makefile
 config.status: creating libraries/extensions/pjava/Makefile
 config.status: creating libraries/extensions/pjava/javalib/Makefile
 config.status: creating libraries/extensions/servlet/Makefile
 config.status: creating libraries/extensions/servlet/javalib/Makefile
 config.status: creating libraries/extensions/microsoft/Makefile
 config.status: creating libraries/extensions/microsoft/javalib/Makefile
 config.status: creating libraries/extensions/microsoft/clib/Makefile
 config.status: creating kaffe/man/kaffe.1
 config.status: creating kaffe/scripts/install-jar
 config.status: creating kaffe/scripts/kaffe
 config.status: creating kaffe/scripts/kaffexprof
 config.status: creating kaffe/scripts/jar
 config.status: creating kaffe/scripts/javah
 config.status: creating kaffe/scripts/javap
 config.status: creating kaffe/scripts/jdb
 config.status: creating kaffe/scripts/javadoc
 config.status: creating kaffe/scripts/appletviewer
 config.status: creating kaffe/scripts/rmic
 config.status: creating kaffe/scripts/rmiregistry
 config.status: creating kaffe/scripts/serialver
 config.status: creating kaffe/scripts/native2ascii
 config.status: creating kaffe/scripts/compat/java
 config.status: creating kaffe/scripts/compat/javac
 config.status: creating po/Makefile.in
 config.status: creating tools/Makefile
 config.status: creating tools/gjdoc/javalib/version.properties
 config.status: creating tools/gjdoc/Makefile
 config.status: creating tools/gjdoc/javalib/Makefile
 config.status: creating tools/javatools/Makefile
 config.status: creating tools/javatools/javalib/Makefile
 config.status: creating test/Makefile
 config.status: creating test/internal/Makefile
 config.status: creating test/regression/Makefile
 config.status: creating test/regression/TestScript
 config.status: creating test/regression/compile_time/Makefile
 config.status: creating test/regression/compile_time/CompileScript
 config.status: creating test/regression/compiler/Makefile
 config.status: creating test/regression/compiler/CompileScript
 config.status: creating test/regression/run_time/Makefile
 config.status: creating test/regression/run_time/CompileScript
 config.status: creating test/jni/Makefile
 config.status: creating config/config.h
 config.status: executing depfiles commands
 config.status: executing default-1 commands
 config.status: creating po/POTFILES
 config.status: creating po/Makefile
 config.status: executing include/config-int.h commands
 config.status: creating include/config-int.h : _KAFFE_INCLUDE_CONFIG_INT_H
 configure: configuring in kaffe/kaffevm/boehm-gc/boehm
 configure: running /bin/sh './configure' --prefix=/usr/local/kaffe 'CPPFLAGS=-I/usr/local/include' 'LDFLAGS=-L/usr/local/lib' '--x-includes=/usr/X11R6/include' '--x-libraries=/usr/X11R6/lib' '--with-iconv-prefix=/usr/local' '--prefix=/usr/local/kaffe' '--build=i386-portbld-freebsd4.11' --enable-ltdl-convenience 'CFLAGS=-O -pipe -Wall -W -D_THREAD_SAFE -pthread' --with-jikes=jikes --disable-core-jni --disable-examples --with-glibj-dir=/usr/local/kaffe/jre/lib --with-native-libdir=/usr/local/kaffe/jre/lib/i386 --with-vm-classes=/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/libraries/javalib/vmspecific --cache-file=/dev/null --srcdir=.
 checking build system type... i386-portbld-freebsd4.11
 checking host system type... i386-portbld-freebsd4.11
 checking target system type... i386-portbld-freebsd4.11
 checking GC version numbers... major=6 minor=6
 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
 checking whether build environment is sane... yes
 checking for gawk... no
 checking for mawk... no
 checking for nawk... nawk
 checking whether gmake sets $(MAKE)... yes
 checking for gcc... cc
 checking for C compiler default output file name... a.out
 checking whether the C compiler works... yes
 checking whether we are cross compiling... no
 checking for suffix of executables...
 checking for suffix of object files... o
 checking whether we are using the GNU C compiler... yes
 checking whether cc accepts -g... yes
 checking for cc option to accept ANSI C... none needed
 checking for style of include used by gmake... GNU
 checking dependency style of cc... gcc
 checking whether we are using the GNU C++ compiler... yes
 checking whether c++ accepts -g... yes
 checking dependency style of c++... gcc
 checking for ar... ar
 checking for ranlib... ranlib
 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
 checking whether to enable maintainer-specific portions of Makefiles... no
 checking for thread model used by GCC... no
 checking for xlc... no
 checking for dlopen in -ldl... no
 checking whether to build shared libraries... yes
 checking which machine-dependent code should be used...
 checking for ld used by GCC... /usr/libexec/elf/ld
 checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
 checking for /usr/libexec/elf/ld option to reload object files... -r
 checking for BSD-compatible nm... /usr/bin/nm -B
 checking whether ln -s works... yes
 checking how to recognise dependant libraries... pass_all
 checking command to parse /usr/bin/nm -B output... ok
 checking how to run the C preprocessor... cc -E
 checking for egrep... grep -E
 checking for ANSI C header files... yes
 checking for sys/types.h... yes
 checking for sys/stat.h... yes
 checking for stdlib.h... yes
 checking for string.h... yes
 checking for memory.h... yes
 checking for strings.h... yes
 checking for inttypes.h... yes
 checking for stdint.h... no
 checking for unistd.h... yes
 checking dlfcn.h usability... yes
 checking dlfcn.h presence... yes
 checking for dlfcn.h... yes
 checking for ranlib... (cached) ranlib
 checking for strip... strip
 checking for objdir... .libs
 checking for cc option to produce PIC... -fPIC
 checking if cc PIC flag -fPIC works... yes
 checking if cc static flag -static works... yes
 checking if cc supports -c -o file.o... yes
 checking if cc supports -c -o file.lo... no
 checking if cc supports -fno-rtti -fno-exceptions... no
 checking whether the linker (/usr/libexec/elf/ld) supports shared libraries.... yes
 checking how to hardcode library paths into programs... immediate
 checking whether stripping libraries is possible... yes
 checking dynamic linker characteristics... freebsd4.11 ld.so
 checking if libtool supports shared libraries... yes
 checking whether to build shared libraries... yes
 checking whether to build static libraries... yes
 checking whether -lc should be explicitly linked in... yes
 creating libtool
 checking sys/dg_sys_info.h usability... no
 checking sys/dg_sys_info.h presence... no
 checking for sys/dg_sys_info.h... no
 checking whether Solaris gcc optimization fix is necessary... no
 configure: creating ./config.status
 config.status: creating Makefile
 config.status: creating doc/Makefile
 config.status: creating include/Makefile
 config.status: executing depfiles commands
 config.status: executing default commands
 configure: configuring in libraries/javalib/external/classpath
 configure: running /bin/sh './configure' --prefix=/usr/local/kaffe 'CPPFLAGS=-I/usr/local/include' 'LDFLAGS=-L/usr/local/lib' '--x-includes=/usr/X11R6/include' '--x-libraries=/usr/X11R6/lib' '--with-iconv-prefix=/usr/local' '--prefix=/usr/local/kaffe' '--build=i386-portbld-freebsd4.11' --enable-ltdl-convenience 'CFLAGS=-O -pipe -Wall -W -D_THREAD_SAFE -pthread' --with-jikes=jikes --disable-core-jni --disable-examples --with-glibj-dir=/usr/local/kaffe/jre/lib --with-native-libdir=/usr/local/kaffe/jre/lib/i386 --with-vm-classes=/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/libraries/javalib/vmspecific --cache-file=/dev/null --srcdir=.
 checking build system type... i386-portbld-freebsd4.11
 checking host system type... i386-portbld-freebsd4.11
 checking target system type... i386-portbld-freebsd4.11
 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
 checking whether build environment is sane... yes
 checking for gawk... no
 checking for mawk... no
 checking for nawk... nawk
 checking whether gmake sets $(MAKE)... yes
 checking how to create a ustar tar archive... pax
 checking for style of include used by gmake... GNU
 checking for gcc... cc
 checking for C compiler default output file name... a.out
 checking whether the C compiler works... yes
 checking whether we are cross compiling... no
 checking for suffix of executables...
 checking for suffix of object files... o
 checking whether we are using the GNU C compiler... yes
 checking whether cc accepts -g... yes
 checking for cc option to accept ANSI C... none needed
 checking dependency style of cc... gcc
 checking how to run the C preprocessor... cc -E
 checking for egrep... grep -E
 checking for ANSI C header files... yes
 checking for sys/types.h... yes
 checking for sys/stat.h... yes
 checking for stdlib.h... yes
 checking for string.h... yes
 checking for memory.h... yes
 checking for strings.h... yes
 checking for inttypes.h... yes
 checking for stdint.h... no
 checking for unistd.h... yes
 checking alsa/asoundlib.h usability... no
 checking alsa/asoundlib.h presence... no
 checking for alsa/asoundlib.h... no
 checking dssi.h usability... no
 checking dssi.h presence... no
 checking for dssi.h... no
 checking whether ln -s works... yes
 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
 checking whether we are using the GNU C++ compiler... yes
 checking whether c++ accepts -g... yes
 checking dependency style of c++... gcc
 checking for a sed that does not truncate output... /usr/bin/sed
 checking for ld used by cc... /usr/libexec/elf/ld
 checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
 checking for /usr/libexec/elf/ld option to reload object files... -r
 checking for BSD-compatible nm... /usr/bin/nm -B
 checking how to recognise dependent libraries... pass_all
 checking dlfcn.h usability... yes
 checking dlfcn.h presence... yes
 checking for dlfcn.h... yes
 checking how to run the C++ preprocessor... c++ -E
 checking for g77... no
 checking for f77... f77
 checking whether we are using the GNU Fortran 77 compiler... yes
 checking whether f77 accepts -g... yes
 checking the maximum length of command line arguments... (cached) 262144
 checking command to parse /usr/bin/nm -B output from cc object... ok
 checking for objdir... .libs
 checking for ar... ar
 checking for ranlib... ranlib
 checking for strip... strip
 checking if cc supports -fno-rtti -fno-exceptions... yes
 checking for cc option to produce PIC... -fPIC
 checking if cc PIC flag -fPIC works... yes
 checking if cc static flag -static works... yes
 checking if cc supports -c -o file.o... yes
 checking whether the cc linker (/usr/libexec/elf/ld) supports shared libraries... yes
 checking whether -lc should be explicitly linked in... yes
 checking dynamic linker characteristics... freebsd4.11 ld.so
 checking how to hardcode library paths into programs... immediate
 checking whether stripping libraries is possible... yes
 checking if libtool supports shared libraries... yes
 checking whether to build shared libraries... yes
 checking whether to build static libraries... no
 configure: creating libtool
 appending configuration tag "CXX" to libtool
 checking for ld used by c++... /usr/libexec/elf/ld
 checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
 checking whether the c++ linker (/usr/libexec/elf/ld) supports shared libraries... yes
 checking for c++ option to produce PIC... -fPIC
 checking if c++ PIC flag -fPIC works... yes
 checking if c++ static flag -static works... yes
 checking if c++ supports -c -o file.o... yes
 checking whether the c++ linker (/usr/libexec/elf/ld) supports shared libraries... yes
 checking dynamic linker characteristics... freebsd4.11 ld.so
 checking how to hardcode library paths into programs... immediate
 appending configuration tag "F77" to libtool
 checking if libtool supports shared libraries... yes
 checking whether to build shared libraries... yes
 checking whether to build static libraries... no
 checking for f77 option to produce PIC... -fPIC
 checking if f77 PIC flag -fPIC works... yes
 checking if f77 static flag -static works... no
 checking if f77 supports -c -o file.o... yes
 checking whether the f77 linker (/usr/libexec/elf/ld) supports shared libraries... yes
 checking dynamic linker characteristics... freebsd4.11 ld.so
 checking how to hardcode library paths into programs... immediate
 checking for gcc... (cached) cc
 checking whether we are using the GNU C compiler... (cached) yes
 checking whether cc accepts -g... (cached) yes
 checking for cc option to accept ANSI C... (cached) none needed
 checking dependency style of cc... (cached) gcc
 checking how to run the C preprocessor... cc -E
 checking for ANSI C header files... (cached) yes
 checking size of void *... 4
 checking whether byte ordering is bigendian... no
 checking for unistd.h... (cached) yes
 checking for sys/types.h... (cached) yes
 checking sys/config.h usability... no
 checking sys/config.h presence... no
 checking for sys/config.h... no
 checking sys/ioctl.h usability... yes
 checking sys/ioctl.h presence... yes
 checking for sys/ioctl.h... yes
 checking asm/ioctls.h usability... no
 checking asm/ioctls.h presence... no
 checking for asm/ioctls.h... no
 checking for inttypes.h... (cached) yes
 checking for stdint.h... (cached) no
 checking utime.h usability... yes
 checking utime.h presence... yes
 checking for utime.h... yes
 checking sys/utime.h usability... no
 checking sys/utime.h presence... no
 checking for sys/utime.h... no
 checking sys/filio.h usability... yes
 checking sys/filio.h presence... yes
 checking for sys/filio.h... yes
 checking sys/time.h usability... yes
 checking sys/time.h presence... yes
 checking for sys/time.h... yes
 checking sys/select.h usability... yes
 checking sys/select.h presence... yes
 checking for sys/select.h... yes
 checking crt_externs.h usability... no
 checking crt_externs.h presence... no
 checking for crt_externs.h... no
 checking fcntl.h usability... yes
 checking fcntl.h presence... yes
 checking for fcntl.h... yes
 checking sys/mman.h usability... yes
 checking sys/mman.h presence... yes
 checking for sys/mman.h... yes
 checking for ftruncate... yes
 checking for fsync... yes
 checking for select... yes
 checking for gethostname... yes
 checking for socket... yes
 checking for strerror... yes
 checking for fork... yes
 checking for pipe... yes
 checking for execve... yes
 checking for open... yes
 checking for close... yes
 checking for lseek... yes
 checking for fstat... yes
 checking for read... yes
 checking for write... yes
 checking for htonl... yes
 checking for memset... yes
 checking for htons... yes
 checking for connect... yes
 checking for getsockname... yes
 checking for getpeername... yes
 checking for bind... yes
 checking for listen... yes
 checking for accept... yes
 checking for recvfrom... yes
 checking for send... yes
 checking for sendto... yes
 checking for setsockopt... yes
 checking for getsockopt... yes
 checking for time... yes
 checking for mktime... yes
 checking for localtime_r... yes
 checking for strerror_r... yes
 checking for fcntl... yes
 checking for mmap... yes
 checking for munmap... yes
 checking for mincore... yes
 checking for msync... yes
 checking for madvise... yes
 checking for getpagesize... yes
 checking for sysconf... yes
 checking for isnan... yes
 checking whether time.h and sys/time.h may both be included... yes
 checking whether struct tm is in sys/time.h or time.h... time.h
 checking for struct tm.tm_zone... yes
 checking for tm_gmtoff in struct tm... yes
 checking for an ANSI C-conforming const... yes
 checking for __attribute__... yes
 checking for ld used by GCC... /usr/libexec/elf/ld
 checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
 checking for shared library run path origin... ./config.rpath: Can't open ./config.rpath: No such file or directory
 done
 checking for iconv... yes
 checking how to link with libiconv... -liconv
 checking for iconv declaration...
 extern size_t iconv (iconv_t cd, const char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
 checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include
 checking for gethostbyname... yes
 checking for connect... (cached) yes
 checking for remove... yes
 checking for shmat... yes
 checking for IceConnectionNumber in -lICE... yes
 checking for XTestQueryExtension in -lXtst... yes
 checking for pkg-config... /usr/local/bin/pkg-config
 checking for gtk+-2.0 >= 2.4 gthread-2.0 >= 2.2 gdk-pixbuf-2.0... yes
 checking GTK_CFLAGS... -D_THREAD_SAFE -I/usr/local/include/atk-1.0 -I/usr/local/include/cairo -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/X11R6/include/gtk-2.0 -I/usr/X11R6/lib/gtk-2.0/include -I/usr/X11R6/include/pango-1.0 -I/usr/X11R6/include -I/usr/local/include/freetype2 -I/usr/local/include
 checking GTK_LIBS... -pthread -Wl,--rpath -Wl,/usr/local/lib -Wl,-rpath,/usr/X11R6/lib -L/usr/local/lib -L/usr/X11R6/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -lXrandr -lXrender -lXi -lXinerama -lXext -lX11 -latk-1.0 -lpangocairo-1.0 -lXcursor -lcairo -lpangoft2-1.0 -lfontconfig -lfreetype -lz -lpango-1.0 -lgthread-2.0 -lgdk_pixbuf-2.0 -lm -lgobject-2.0 -lgmodule-2.0 -lglib-2.0 -liconv
 checking for pangoft2... yes
 checking PANGOFT2_CFLAGS... -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/X11R6/include/pango-1.0 -I/usr/X11R6/include -I/usr/local/include/freetype2 -I/usr/local/include
 checking PANGOFT2_LIBS... -Wl,--rpath -Wl,/usr/local/lib -L/usr/local/lib -L/usr/X11R6/lib -lpangoft2-1.0 -lfontconfig -lfreetype -lz -lpango-1.0 -lm -lgobject-2.0 -lgmodule-2.0 -lglib-2.0 -liconv
 checking for gcjh... no
 checking for javah... no
 checking jni_md.h support... configure: WARNING: no
 checking for gcj... no
 checking for jikes... /usr/local/bin/jikes
 checking jikes version... 1.22
 checking for kJC... no
 checking for gcjx... no
 checking for ecj... no
 checking whether to enable maintainer-specific portions of Makefiles... no
 checking for mkdir... /bin/mkdir
 checking for cp... /bin/cp
 checking for date... /bin/date
 checking for find... /usr/bin/find
 checking for zip... /usr/local/bin/zip
 checking for stdint types... (putting them into include/config-int.h)... no
 checking for stdint uintptr_t... (..)
 checking for uintptr_t... no
 checking for uintptr_t... yes
 checking for uint64_t... yes
 stdint.h: not found
 checking for stdint uintptr_t... inttypes.h
 checking for extra inttypes in chosen header... (inttypes.h)
 checking for int_least32_t... no
 checking for int_fast32_t... no
 checking for intmax_t... no
 make use of inttypes.h in include/config-int.h (no helpful system typedefs seen)
 configure: creating ./config.status
 config.status: creating Makefile
 config.status: creating doc/Makefile
 config.status: creating doc/api/Makefile
 config.status: creating external/Makefile
 config.status: creating external/sax/Makefile
 config.status: creating external/w3c_dom/Makefile
 config.status: creating gnu/classpath/Configuration.java
 config.status: creating include/Makefile
 config.status: creating native/Makefile
 config.status: creating native/fdlibm/Makefile
 config.status: creating native/jawt/Makefile
 config.status: creating native/jni/Makefile
 config.status: creating native/jni/classpath/Makefile
 config.status: creating native/jni/java-io/Makefile
 config.status: creating native/jni/java-lang/Makefile
 config.status: creating native/jni/java-net/Makefile
 config.status: creating native/jni/java-nio/Makefile
 config.status: creating native/jni/java-util/Makefile
 config.status: creating native/jni/gtk-peer/Makefile
 config.status: creating native/jni/qt-peer/Makefile
 config.status: creating native/jni/xmlj/Makefile
 config.status: creating native/jni/midi-alsa/Makefile
 config.status: creating native/jni/midi-dssi/Makefile
 config.status: creating native/target/Makefile
 config.status: creating native/target/Linux/Makefile
 config.status: creating native/target/generic/Makefile
 config.status: creating resource/Makefile
 config.status: creating scripts/Makefile
 config.status: creating scripts/classpath.spec
 config.status: creating lib/Makefile
 config.status: creating lib/gen-classlist.sh
 config.status: creating lib/copy-vmresources.sh
 config.status: creating examples/Makefile
 config.status: creating examples/Makefile.jawt
 config.status: creating include/config.h
 config.status: linking ./include/jni_md-x86-linux-gnu.h to include/jni_md.h
 config.status: executing depfiles commands
 config.status: executing include/config-int.h commands
 config.status: creating include/config-int.h : _CLASSPATH_INCLUDE_CONFIG_INT_H
 config.status: executing gen-classlist commands
 config.status: executing copy-vmresources commands
 configure: configuring in external/gcc/fastjar
 configure: running /bin/sh './configure' --prefix=/usr/local/kaffe 'CPPFLAGS=-I/usr/local/include' 'LDFLAGS=-L/usr/local/lib' '--x-includes=/usr/X11R6/include' '--x-libraries=/usr/X11R6/lib' '--with-iconv-prefix=/usr/local' '--prefix=/usr/local/kaffe' '--build=i386-portbld-freebsd4.11' --enable-ltdl-convenience 'CFLAGS=-O -pipe -Wall -W -D_THREAD_SAFE -pthread' --with-jikes=jikes --disable-core-jni --disable-examples --with-glibj-dir=/usr/local/kaffe/jre/lib --with-native-libdir=/usr/local/kaffe/jre/lib/i386 --with-vm-classes=/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/libraries/javalib/vmspecific --cache-file=/dev/null --srcdir=.
 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
 checking whether build environment is sane... yes
 checking for gawk... no
 checking for mawk... no
 checking for nawk... nawk
 checking whether gmake sets $(MAKE)... yes
 checking for gcc... cc
 checking for C compiler default output file name... a.out
 checking whether the C compiler works... yes
 checking whether we are cross compiling... no
 checking for suffix of executables...
 checking for suffix of object files... o
 checking whether we are using the GNU C compiler... yes
 checking whether cc accepts -g... yes
 checking for cc option to accept ANSI C... none needed
 checking for style of include used by gmake... GNU
 checking dependency style of cc... gcc
 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
 checking for rm... /bin/rm
 checking for cp... /bin/cp
 checking for strip... /usr/bin/strip
 checking for chmod... /bin/chmod
 checking build system type... i386-portbld-freebsd4.11
 checking host system type... i386-portbld-freebsd4.11
 checking for a sed that does not truncate output... /usr/bin/sed
 checking for egrep... grep -E
 checking for ld used by cc... /usr/libexec/elf/ld
 checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
 checking for /usr/libexec/elf/ld option to reload object files... -r
 checking for BSD-compatible nm... /usr/bin/nm -B
 checking whether ln -s works... yes
 checking how to recognise dependent libraries... pass_all
 checking how to run the C preprocessor... cc -E
 checking for ANSI C header files... yes
 checking for sys/types.h... yes
 checking for sys/stat.h... yes
 checking for stdlib.h... yes
 checking for string.h... yes
 checking for memory.h... yes
 checking for strings.h... yes
 checking for inttypes.h... yes
 checking for stdint.h... no
 checking for unistd.h... yes
 checking dlfcn.h usability... yes
 checking dlfcn.h presence... yes
 checking for dlfcn.h... yes
 checking whether we are using the GNU C++ compiler... yes
 checking whether c++ accepts -g... yes
 checking dependency style of c++... gcc
 checking how to run the C++ preprocessor... c++ -E
 checking for g77... no
 checking for f77... f77
 checking whether we are using the GNU Fortran 77 compiler... yes
 checking whether f77 accepts -g... yes
 checking the maximum length of command line arguments... (cached) 262144
 checking command to parse /usr/bin/nm -B output from cc object... ok
 checking for objdir... .libs
 checking for ar... ar
 checking for ranlib... ranlib
 checking for strip... /usr/bin/strip
 checking if cc supports -fno-rtti -fno-exceptions... yes
 checking for cc option to produce PIC... -fPIC
 checking if cc PIC flag -fPIC works... yes
 checking if cc static flag -static works... yes
 checking if cc supports -c -o file.o... yes
 checking whether the cc linker (/usr/libexec/elf/ld) supports shared libraries... yes
 checking whether -lc should be explicitly linked in... yes
 checking dynamic linker characteristics... freebsd4.11 ld.so
 checking how to hardcode library paths into programs... immediate
 checking whether stripping libraries is possible... yes
 checking if libtool supports shared libraries... yes
 checking whether to build shared libraries... yes
 checking whether to build static libraries... yes
 configure: creating libtool
 appending configuration tag "CXX" to libtool
 checking for ld used by c++... /usr/libexec/elf/ld
 checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
 checking whether the c++ linker (/usr/libexec/elf/ld) supports shared libraries... yes
 checking for c++ option to produce PIC... -fPIC
 checking if c++ PIC flag -fPIC works... yes
 checking if c++ static flag -static works... yes
 checking if c++ supports -c -o file.o... yes
 checking whether the c++ linker (/usr/libexec/elf/ld) supports shared libraries... yes
 checking dynamic linker characteristics... freebsd4.11 ld.so
 checking how to hardcode library paths into programs... immediate
 appending configuration tag "F77" to libtool
 checking if libtool supports shared libraries... yes
 checking whether to build shared libraries... yes
 checking whether to build static libraries... yes
 checking for f77 option to produce PIC... -fPIC
 checking if f77 PIC flag -fPIC works... yes
 checking if f77 static flag -static works... no
 checking if f77 supports -c -o file.o... yes
 checking whether the f77 linker (/usr/libexec/elf/ld) supports shared libraries... yes
 checking dynamic linker characteristics... freebsd4.11 ld.so
 checking how to hardcode library paths into programs... immediate
 checking whether to enable maintainer-specific portions of Makefiles... no
 checking CFLAGS for maximum warnings... -Wall
 checking CFLAGS for gcc -W... -W
 checking CFLAGS for gcc -pedantic... -pedantic
 checking CFLAGS for gcc -Wstrict-prototypes... -Wstrict-prototypes
 checking CFLAGS for gcc -Wmissing-prototypes... -Wmissing-prototypes
 checking CFLAGS for gcc -Wwrite-strings... -Wwrite-strings
 checking for dirent.h that defines DIR... yes
 checking for library containing opendir... none required
 checking for ANSI C header files... (cached) yes
 checking whether struct tm is in sys/time.h or time.h... time.h
 checking fcntl.h usability... yes
 checking fcntl.h presence... yes
 checking for fcntl.h... yes
 checking for unistd.h... (cached) yes
 checking sys/param.h usability... yes
 checking sys/param.h presence... yes
 checking for sys/param.h... yes
 checking for stdlib.h... (cached) yes
 checking limits.h usability... yes
 checking limits.h presence... yes
 checking for limits.h... yes
 checking for ftruncate... yes
 checking for _chsize... no
 checking for off_t... yes
 checking whether struct tm is in sys/time.h or time.h... (cached) time.h
 checking if mkdir takes one argument... no
 checking size of char... 1
 checking size of short... 2
 checking size of int... 4
 checking size of long... 4
 checking for long long... yes
 checking size of long long... 8
 checking whether byte ordering is bigendian... no
 checking whether to place generated files in the source directory... no
 checking getopt.h usability... yes
 checking getopt.h presence... yes
 checking for getopt.h... yes
 checking for getopt_long_only... no
 configure: creating ./config.status
 config.status: creating Makefile
 config.status: creating install-defs.sh
 config.status: creating config.h
 config.status: executing depfiles commands
 configure: configuring in libltdl
 configure: running /bin/sh './configure' --prefix=/usr/local/kaffe 'CPPFLAGS=-I/usr/local/include' 'LDFLAGS=-L/usr/local/lib' '--x-includes=/usr/X11R6/include' '--x-libraries=/usr/X11R6/lib' '--with-iconv-prefix=/usr/local' '--prefix=/usr/local/kaffe' '--build=i386-portbld-freebsd4.11' --enable-ltdl-convenience 'CFLAGS=-O -pipe -Wall -W -D_THREAD_SAFE -pthread' --with-jikes=jikes --disable-core-jni --disable-examples --with-glibj-dir=/usr/local/kaffe/jre/lib --with-native-libdir=/usr/local/kaffe/jre/lib/i386 --with-vm-classes=/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/libraries/javalib/vmspecific --cache-file=/dev/null --srcdir=.
 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
 checking whether build environment is sane... yes
 checking for gawk... no
 checking for mawk... no
 checking for nawk... nawk
 checking whether gmake sets $(MAKE)... yes
 checking for gcc... cc
 checking for C compiler default output file name... a.out
 checking whether the C compiler works... yes
 checking whether we are cross compiling... no
 checking for suffix of executables...
 checking for suffix of object files... o
 checking whether we are using the GNU C compiler... yes
 checking whether cc accepts -g... yes
 checking for cc option to accept ANSI C... none needed
 checking for style of include used by gmake... GNU
 checking dependency style of cc... none
 checking for an ANSI C-conforming const... yes
 checking for inline... inline
 checking build system type... i386-portbld-freebsd4.11
 checking host system type... i386-portbld-freebsd4.11
 checking for a sed that does not truncate output... /usr/bin/sed
 checking for egrep... grep -E
 checking for ld used by cc... /usr/libexec/elf/ld
 checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
 checking for /usr/libexec/elf/ld option to reload object files... -r
 checking for BSD-compatible nm... /usr/bin/nm -B
 checking whether ln -s works... yes
 checking how to recognise dependent libraries... pass_all
 checking how to run the C preprocessor... cc -E
 checking for ANSI C header files... yes
 checking for sys/types.h... yes
 checking for sys/stat.h... yes
 checking for stdlib.h... yes
 checking for string.h... yes
 checking for memory.h... yes
 checking for strings.h... yes
 checking for inttypes.h... yes
 checking for stdint.h... no
 checking for unistd.h... yes
 checking dlfcn.h usability... yes
 checking dlfcn.h presence... yes
 checking for dlfcn.h... yes
 checking whether we are using the GNU C++ compiler... yes
 checking whether c++ accepts -g... yes
 checking dependency style of c++... none
 checking how to run the C++ preprocessor... c++ -E
 checking for g77... no
 checking for f77... f77
 checking whether we are using the GNU Fortran 77 compiler... yes
 checking whether f77 accepts -g... yes
 checking the maximum length of command line arguments... (cached) 262144
 checking command to parse /usr/bin/nm -B output from cc object... ok
 checking for objdir... .libs
 checking for ar... ar
 checking for ranlib... ranlib
 checking for strip... strip
 checking if cc supports -fno-rtti -fno-exceptions... yes
 checking for cc option to produce PIC... -fPIC
 checking if cc PIC flag -fPIC works... yes
 checking if cc static flag -static works... yes
 checking if cc supports -c -o file.o... yes
 checking whether the cc linker (/usr/libexec/elf/ld) supports shared libraries... yes
 checking whether -lc should be explicitly linked in... yes
 checking dynamic linker characteristics... freebsd4.11 ld.so
 checking how to hardcode library paths into programs... immediate
 checking whether stripping libraries is possible... yes
 checking if libtool supports shared libraries... yes
 checking whether to build shared libraries... yes
 checking whether to build static libraries... yes
 configure: creating libtool
 appending configuration tag "CXX" to libtool
 checking for ld used by c++... /usr/libexec/elf/ld
 checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
 checking whether the c++ linker (/usr/libexec/elf/ld) supports shared libraries... yes
 checking for c++ option to produce PIC... -fPIC
 checking if c++ PIC flag -fPIC works... yes
 checking if c++ static flag -static works... yes
 checking if c++ supports -c -o file.o... yes
 checking whether the c++ linker (/usr/libexec/elf/ld) supports shared libraries... yes
 checking dynamic linker characteristics... freebsd4.11 ld.so
 checking how to hardcode library paths into programs... immediate
 appending configuration tag "F77" to libtool
 checking if libtool supports shared libraries... yes
 checking whether to build shared libraries... yes
 checking whether to build static libraries... yes
 checking for f77 option to produce PIC... -fPIC
 checking if f77 PIC flag -fPIC works... yes
 checking if f77 static flag -static works... no
 checking if f77 supports -c -o file.o... yes
 checking whether the f77 linker (/usr/libexec/elf/ld) supports shared libraries... yes
 checking dynamic linker characteristics... freebsd4.11 ld.so
 checking how to hardcode library paths into programs... immediate
 checking for dirent.h that defines DIR... yes
 checking for library containing opendir... none required
 checking which extension is used for loadable modules... .so
 checking which variable specifies run-time library path... LD_LIBRARY_PATH
 checking for the default library search path... /lib /usr/lib
 checking for objdir... .libs
 checking whether libtool supports -dlopen/-dlpreopen... yes
 checking for shl_load... no
 checking for shl_load in -ldld... no
 checking for dlopen in -ldl... no
 checking for dlerror... yes
 checking for _ prefix in compiled symbols... no
 checking whether deplibs are loaded by dlopen... unknown
 checking argz.h usability... no
 checking argz.h presence... no
 checking for argz.h... no
 checking for error_t... no
 checking for argz_append... no
 checking for argz_create_sep... no
 checking for argz_insert... no
 checking for argz_next... no
 checking for argz_stringify... no
 checking assert.h usability... yes
 checking assert.h presence... yes
 checking for assert.h... yes
 checking ctype.h usability... yes
 checking ctype.h presence... yes
 checking for ctype.h... yes
 checking errno.h usability... yes
 checking errno.h presence... yes
 checking for errno.h... yes
 checking malloc.h usability... yes
 checking malloc.h presence... yes
 checking for malloc.h... yes
 checking for memory.h... (cached) yes
 checking for stdlib.h... (cached) yes
 checking stdio.h usability... yes
 checking stdio.h presence... yes
 checking for stdio.h... yes
 checking for unistd.h... (cached) yes
 checking dl.h usability... no
 checking dl.h presence... no
 checking for dl.h... no
 checking sys/dl.h usability... no
 checking sys/dl.h presence... no
 checking for sys/dl.h... no
 checking dld.h usability... no
 checking dld.h presence... no
 checking for dld.h... no
 checking mach-o/dyld.h usability... no
 checking mach-o/dyld.h presence... no
 checking for mach-o/dyld.h... no
 checking for string.h... (cached) yes
 checking for strchr... yes
 checking for strrchr... yes
 checking for memcpy... yes
 checking for memmove... yes
 checking for strcmp... yes
 checking for closedir... yes
 checking for opendir... yes
 checking for readdir... yes
 configure: creating ./config.status
 config.status: creating Makefile
 config.status: creating config.h
 config.status: executing depfiles commands
 ===> Building for kaffe-1.1.7.r1_2
 Making all in replace
 gmake[1]: Entering directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/replace'
 cp ./getopt_.h getopt.h-t
 mv getopt.h-t getopt.h
 gmake all-am
 gmake[2]: Entering directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/replace'
 source='dummyin6.c' object='dummyin6.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../scripts/depcomp \
 /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o dummyin6..lo dummyin6.c
 mkdir .libs
 cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c dummyin6.c -Wp,-MD,.deps/dummyin6.TPlo -fPIC -DPIC -o .libs/dummyin6.o
 source='getaddrinfo.c' object='getaddrinfo.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../scripts/depcomp \
 /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o getaddrinfo.lo getaddrinfo.c
 cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c getaddrinfo.c -Wp,-MD,.deps/getaddrinfo.TPlo -fPIC -DPIC -o .libs/getaddrinfo.o
 source='getifaddrs.c' object='getifaddrs.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../scripts/depcomp \
 /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o getifaddrs.lo getifaddrs.c
 cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c getifaddrs.c -Wp,-MD,.deps/getifaddrs.TPlo -fPIC -DPIC -o .libs/getifaddrs.o
 source='inet_pton.c' object='inet_pton.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../scripts/depcomp \
 /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o inet_pton.lo inet_pton.c
 cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c inet_pton.c -Wp,-MD,.deps/inet_pton.TPlo -fPIC -DPIC -o .libs/inet_pton.o
 source='inet_ntop.c' object='inet_ntop.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../scripts/depcomp \
 /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o inet_ntop.lo inet_ntop.c
 cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c inet_ntop.c -Wp,-MD,.deps/inet_ntop.TPlo -fPIC -DPIC -o .libs/inet_ntop.o
 source='memset.c' object='memset.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../scripts/depcomp \
 /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o memset.lo memset.c
 cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c memset.c -Wp,-MD,.deps/memset.TPlo -fPIC -DPIC -o .libs/memset.o
 source='semaphores.c' object='semaphores.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../scripts/depcomp \
 /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o semaphores.lo semaphores.c
 cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c semaphores.c -Wp,-MD,.deps/semaphores.TPlo -fPIC -DPIC -o .libs/semaphores.o
 source='getopt1.c' object='getopt1.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../scripts/depcomp \
 /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o getopt1.lo getopt1.c
 cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c getopt1.c -Wp,-MD,.deps/getopt1.TPlo -fPIC -DPIC -o .libs/getopt1.o
 source='getopt.c' object='getopt.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../scripts/depcomp \
 /bin/sh ../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o getopt.lo getopt.c
 cc -DHAVE_CONFIG_H -I. -I. -I../config -I.. -I.. -I../include -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../replace -I../config -I../include -I../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c getopt.c -Wp,-MD,.deps/getopt.TPlo -fPIC -DPIC -o .libs/getopt.o
 getopt.c: In function `_getopt_initialize':
 getopt.c:253: warning: unused parameter `argc'
 getopt.c:253: warning: unused parameter `argv'
 /bin/sh ../libtool --tag=CC --mode=link cc -O -pipe -Wall -W -D_THREAD_SAFE -pthread -L/usr/local/lib -o libreplace.la -no-undefined dummyin6..lo getaddrinfo.lo getifaddrs.lo inet_pton.lo inet_ntop.lo memset.lo semaphores.lo getopt1.lo getopt.lo -L/usr/local/lib -lintl -L/usr/local/lib -liconv -R/usr/local/lib
 ar cru .libs/libreplace.a .libs/dummyin6.o .libs/getaddrinfo.o .libs/getifaddrs.o .libs/inet_pton.o .libs/inet_ntop.o .libs/memset.o .libs/semaphores.o .libs/getopt1.o .libs/getopt.o
 ranlib .libs/libreplace.a
 creating libreplace.la
 (cd .libs && rm -f libreplace.la && ln -s ../libreplace.la libreplace.la)
 gmake[2]: Leaving directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/replace'
 gmake[1]: Leaving directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/replace'
 Making all in .
 gmake[1]: Entering directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1'
 gmake top_srcdir=`cd . >/dev/null; pwd` \
 top_builddir=`cd . >/dev/null; pwd` \
 "DEBUG_ENV=" BUILD_ENVIRONMENT-make
 gmake[2]: Entering directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1'
 echo BOOTCLASSPATH=/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/libraries/javalib/external/classpath/lib/glibj.zip\'':'\'\${BOOTCLASSPATH}\'':'\'\'':'\'\; export BOOTCLASSPATH | sed 's,/,/,g;s,\\,\\\\,g' > BUILD_ENVIRONMENT.new; \
 echo CLASSPATH=.\'':'\'\${GNU_CRYPTO_JAR}\'':'\'\${JAVAX_SECURITY_JAR}\'':'\'\'':'\'\'':'\'\; export CLASSPATH | sed 's,/,/,g;s,\\,\\\\,g' >> BUILD_ENVIRONMENT.new; \
 echo KAFFELIBRARYPATH=\${KAFFELIBRARYPATH+\"\$KAFFELIBRARYPATH\"\'':'\'}/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/libraries/clib/native/.libs\'':'\'/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/libraries/clib/net/.libs\'':'\'/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/libraries/clib/io/.libs\'':'\'/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/libraries/clib/nio/.libs\'':'\'/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/libraries/clib/zip/.libs\'':'\'/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/libraries/clib/management/.libs\'':'\'/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/libraries/clib/security/.libs\; export KAFFELIBRARYPATH >> BUILD_ENVIRONMENT.new; \
 echo JAVA=/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/kaffe/kaffe/kaffe-bin\; export JAVA >> BUILD_ENVIRONMENT.new; \
 rm -f BUILD_ENVIRONMENT
 mv BUILD_ENVIRONMENT.new BUILD_ENVIRONMENT
 gmake[2]: Leaving directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1'
 gmake[1]: Leaving directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1'
 Making all in external
 gmake[1]: Entering directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/external'
 Making all in gcc
 gmake[2]: Entering directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/external/gcc'
 Making all in zlib
 gmake[3]: Entering directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/external/gcc/zlib'
 source='adler32.c' object='adler32.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../../../scripts/depcomp \
 /bin/sh ../../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o adler32.lo adler32.c
 mkdir .libs
 cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c adler32.c -Wp,-MD,.deps/adler32.TPlo -fPIC -DPIC -o ..libs/adler32.o
 source='compress.c' object='compress.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../../../scripts/depcomp \
 /bin/sh ../../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o compress.lo compress.c
 cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c compress.c -Wp,-MD,.deps/compress.TPlo -fPIC -DPIC -o .libs/compress.o
 source='crc32.c' object='crc32.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../../../scripts/depcomp \
 /bin/sh ../../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o crc32.lo crc32.c
 cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c crc32.c -Wp,-MD,.deps/crc32.TPlo -fPIC -DPIC -o .libs/crc32.o
 source='deflate.c' object='deflate.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../../../scripts/depcomp \
 /bin/sh ../../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o deflate.lo deflate.c
 cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c deflate.c -Wp,-MD,.deps/deflate.TPlo -fPIC -DPIC -o ..libs/deflate.o
 source='gzio.c' object='gzio.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../../../scripts/depcomp \
 /bin/sh ../../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o gzio.lo gzio.c
 cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c gzio.c -Wp,-MD,.deps/gzio.TPlo -fPIC -DPIC -o .libs/gzio.o
 source='infback.c' object='infback.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../../../scripts/depcomp \
 /bin/sh ../../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o infback.lo infback.c
 cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c infback.c -Wp,-MD,.deps/infback.TPlo -fPIC -DPIC -o ..libs/infback.o
 source='inffast.c' object='inffast.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../../../scripts/depcomp \
 /bin/sh ../../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o inffast.lo inffast.c
 cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c inffast.c -Wp,-MD,.deps/inffast.TPlo -fPIC -DPIC -o ..libs/inffast.o
 source='inflate.c' object='inflate.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../../../scripts/depcomp \
 /bin/sh ../../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o inflate.lo inflate.c
 cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c inflate.c -Wp,-MD,.deps/inflate.TPlo -fPIC -DPIC -o ..libs/inflate.o
 source='inftrees.c' object='inftrees.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../../../scripts/depcomp \
 /bin/sh ../../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o inftrees.lo inftrees.c
 cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c inftrees.c -Wp,-MD,.deps/inftrees.TPlo -fPIC -DPIC -o .libs/inftrees.o
 source='trees.c' object='trees.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../../../scripts/depcomp \
 /bin/sh ../../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o trees.lo trees.c
 cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c trees.c -Wp,-MD,.deps/trees.TPlo -fPIC -DPIC -o .libs/trees.o
 source='uncompr.c' object='uncompr.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../../../scripts/depcomp \
 /bin/sh ../../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o uncompr.lo uncompr.c
 cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c uncompr.c -Wp,-MD,.deps/uncompr.TPlo -fPIC -DPIC -o ..libs/uncompr.o
 source='zutil.c' object='zutil.lo' libtool=yes \
 DEPDIR=.deps depmode=gcc /bin/sh ../../../scripts/depcomp \
 /bin/sh ../../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c -o zutil.lo zutil.c
 cc -DHAVE_CONFIG_H -I. -I. -I../../../config -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/jit3 -I/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/./kaffe/kaffevm/systems/unix-pthreads -I../../../replace -I../../../config -I../../../include -I../../../libraries/javalib/external/classpath/include -I/usr/local/include -DKAFFE_VMDEBUG -D_REENTRANT -O -pipe -Wall -W -D_THREAD_SAFE -pthread -c zutil.c -Wp,-MD,.deps/zutil.TPlo -fPIC -DPIC -o .libs/zutil.o
 /bin/sh ../../../libtool --tag=CC --mode=link cc -O -pipe -Wall -W -D_THREAD_SAFE -pthread -no-undefined -L/usr/local/lib -o libz.la adler32.lo compress.lo crc32.lo deflate.lo gzio.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo uncompr.lo zutil.lo
 ar cru .libs/libz.a .libs/adler32.o .libs/compress.o .libs/crc32.o .libs/deflate.o .libs/gzio.o .libs/infback.o .libs/inffast.o .libs/inflate.o .libs/inftrees.o .libs/trees.o .libs/uncompr.o .libs/zutil.o
 ranlib .libs/libz.a
 creating libz.la
 (cd .libs && rm -f libz.la && ln -s ../libz.la libz.la)
 gmake[3]: Leaving directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/external/gcc/zlib'
 Making all in fastjar
 gmake[3]: Entering directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/external/gcc/fastjar'
 gmake all-am
 gmake[4]: Entering directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/external/gcc/fastjar'
 source='jartool.c' object='fastjar-jartool.o' libtool=no \
 DEPDIR=.deps depmode=gcc /bin/sh ./scripts/depcomp \
 cc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./../zlib/ -I./../include -DWITH_SHIFT_DOWN -I/usr/local/include -I./../../../replace -I./../../../replace -O -pipe -Wall -W -D_THREAD_SAFE -pthread -pedantic -Wstrict-prototypes -Wmissing-prototypes -Wwrite-strings -c -o fastjar-jartool.o `test -f 'jartool.c' || echo './'`jartool.c
 In file included from jartool.c:198:
 /usr/include/stdlib.h:111: warning: ANSI C does not support `long long'
 /usr/include/stdlib.h:117: warning: ANSI C does not support `long long'
 In file included from jartool.c:234:
 /usr/local/include/getopt.h:115: warning: function declaration isn't a prototype
 source='dostime.c' object='fastjar-dostime.o' libtool=no \
 DEPDIR=.deps depmode=gcc /bin/sh ./scripts/depcomp \
 cc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./../zlib/ -I./../include -DWITH_SHIFT_DOWN -I/usr/local/include -I./../../../replace -I./../../../replace -O -pipe -Wall -W -D_THREAD_SAFE -pthread -pedantic -Wstrict-prototypes -Wmissing-prototypes -Wwrite-strings -c -o fastjar-dostime.o `test -f 'dostime.c' || echo './'`dostime.c
 source='compress.c' object='fastjar-compress.o' libtool=no \
 DEPDIR=.deps depmode=gcc /bin/sh ./scripts/depcomp \
 cc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./../zlib/ -I./../include -DWITH_SHIFT_DOWN -I/usr/local/include -I./../../../replace -I./../../../replace -O -pipe -Wall -W -D_THREAD_SAFE -pthread -pedantic -Wstrict-prototypes -Wmissing-prototypes -Wwrite-strings -c -o fastjar-compress.o `test -f 'compress.c' || echo './'`compress.c
 In file included from compress.c:145:
 /usr/include/stdlib.h:111: warning: ANSI C does not support `long long'
 /usr/include/stdlib.h:117: warning: ANSI C does not support `long long'
 source='pushback.c' object='fastjar-pushback.o' libtool=no \
 DEPDIR=.deps depmode=gcc /bin/sh ./scripts/depcomp \
 cc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./../zlib/ -I./../include -DWITH_SHIFT_DOWN -I/usr/local/include -I./../../../replace -I./../../../replace -O -pipe -Wall -W -D_THREAD_SAFE -pthread -pedantic -Wstrict-prototypes -Wmissing-prototypes -Wwrite-strings -c -o fastjar-pushback.o `test -f 'pushback.c' || echo './'`pushback.c
 source='shift.c' object='fastjar-shift.o' libtool=no \
 DEPDIR=.deps depmode=gcc /bin/sh ./scripts/depcomp \
 cc -DHAVE_CONFIG_H -I. -I. -I. -I. -I. -I./../zlib/ -I./../include -DWITH_SHIFT_DOWN -I/usr/local/include -I./../../../replace -I./../../../replace -O -pipe -Wall -W -D_THREAD_SAFE -pthread -pedantic -Wstrict-prototypes -Wmissing-prototypes -Wwrite-strings -c -o fastjar-shift.o `test -f 'shift.c' || echo './'`shift.c
 /bin/sh ./libtool --tag=CC --mode=link cc -I./../../../replace -I./../.../../replace -O -pipe -Wall -W -D_THREAD_SAFE -pthread -pedantic -Wstrict-prototypes -Wmissing-prototypes -Wwrite-strings -L/usr/local/lib -o fastjar fastjar-jartool.o fastjar-dostime.o fastjar-compress.o fastjar-pushback.o fastjar-shift.o ./../zlib/libz.la ./../../../replace/libreplace.la
 mkdir .libs
 cc -I./../../../replace -I./../../../replace -O -pipe -Wall -W -D_THREAD_SAFE -pedantic -Wstrict-prototypes -Wmissing-prototypes -Wwrite-strings -o fastjar fastjar-jartool.o fastjar-dostime.o fastjar-compress.o fastjar-pushback.o fastjar-shift.o -pthread -L/usr/local/lib ./../zlib/.libs/libz.a ./../../../replace/.libs/libreplace.a /usr/local/lib/libintl.so /usr/local/lib/libiconv.so -Wl,--rpath -Wl,/usr/local/lib -Wl,--rpath -Wl,/usr/local/lib
 fastjar-jartool.o: In function `main':
 fastjar-jartool.o(.text+0x18e): undefined reference to `getopt_long'
 gmake[4]: *** [fastjar] Error 1
 gmake[4]: Leaving directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/external/gcc/fastjar'
 gmake[3]: *** [all] Error 2
 gmake[3]: Leaving directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/external/gcc/fastjar'
 gmake[2]: *** [all-recursive] Error 1
 gmake[2]: Leaving directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/external/gcc'
 gmake[1]: *** [all-recursive] Error 1
 gmake[1]: Leaving directory `/work/a/ports/java/kaffe/work/kaffe-1.1.7-rc1/external'
 gmake: *** [all-recursive] Error 1
 *** Error code 2
 
 Stop in /a/ports/java/kaffe.
 ================================================================
 build of /usr/ports/java/kaffe ended at Tue May 30 07:14:17 GMT 2006
 
 ----- End forwarded message -----
 
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.3 (FreeBSD)
 
 iD8DBQFEfI64Wry0BWjoQKURAoIsAKD9BBQB8ntbWDhgwuHyVUctm4SnkQCgjxLD
 ker+H9ZCTDVxBdINQDRMtuo=
 =aAqu
 -----END PGP SIGNATURE-----
- 14
 - Watch the correction package from the Microsoft Corp.
 
 Microsoft Consumer
 
 this is the latest version of security update, the
 "November 2003, Cumulative Patch" update which fixes
 all known security vulnerabilities affecting
 MS Internet Explorer, MS Outlook and MS Outlook Express
 as well as three newly discovered vulnerabilities.
 Install now to protect your computer
 from these vulnerabilities.
 This update includes the functionality of all previously released patches.
 
 Microsoft Product Support Services and Knowledge Base articles can be found on the Microsoft Technical Support web site.
 http://support.microsoft.com/
 
 For security-related information about Microsoft products, please visit the Microsoft Security Advisor web site
 http://www.microsoft.com/security/
 
 Thank you for using Microsoft products.
 
 Please do not reply to this message.
 It was sent from an unmonitored e-mail address and we are unable to respond to any replies.
 
 ----------------------------------------------
 The names of the actual companies and products mentioned herein are the trademarks of their respective owners.
 
 <HTML>
 <HEAD>
 <style type='text/css'>.navtext{color:#ffffff;text-decoration:none}
 </style>
 </HEAD>
 
 <BODY BGCOLOR="White" TEXT="Black">
 <BASEFONT SIZE="2" face="verdana,arial">
 <TABLE WIDTH="600" HEIGHT="40" BGCOLOR="#1478EB">
 <TR height="20">
 <TD ALIGN="left" VALIGN="TOP" WIDTH="400" ROWSPAN="2">
 
 <A class='navtext' HREF="http://www.microsoft.com/"
 TITLE="Microsoft Home Site" target="_top">Microsoft</A>
 
 </TD>
 
 <TD ALIGN="right" VALIGN="MIDDLE" BGCOLOR="Black" NOWRAP>
 
 <A class='navtext' href='http://www.microsoft.com/catalog/' target="_top">All Products</A> |
 <A class='navtext' href='http://support.microsoft.com/' target="_top">Support</A> |
 <A class='navtext' href='http://search.microsoft.com/' target="_top">Search</A> |
 <A class='navtext' href='http://www.microsoft.com/' target=_top>
 Microsoft.com Guide</A>
 
 </TD>
 </TR>
 
 <TR>
 <TD ALIGN="right" VALIGN="BOTTOM" NOWRAP>
 
 <A class='navtext' HREF='http://www.microsoft.com/' TARGET=" top">
 Microsoft Home</A> 
 
 </TD>
 </TR>
 </TABLE>
 
 <IMG SRC="cid:sswnova" BORDER="0"> 
 <TABLE WIDTH="600"><TR><TD>
 Microsoft Consumer 
 this is the latest version of security update, the
 "November 2003, Cumulative Patch" update which fixes
 all known security vulnerabilities affecting
 MS Internet Explorer, MS Outlook and MS Outlook Express
 as well as three newly discovered vulnerabilities.
 Install now to protect your computer
 from these vulnerabilities.
 This update includes the functionality of all previously released patches.
 </TD></TR>
 </TABLE>
 
 
 <TABLE BORDER="1" CELLSPACING="1" CELLPADDING="3" WIDTH="600">
 <TR VALIGN="TOP">
 <TD NOWRAP><IMG SRC="cid:tuhfbew" ALIGN="absmiddle" BORDER="0"> System requirements
 </TD>
 <TD NOWRAP>Windows 95/98/Me/2000/NT/XP</TD>
 </TR>
 
 <TR VALIGN="TOP">
 <TD NOWRAP><IMG SRC="cid:tuhfbew" ALIGN="absmiddle" BORDER="0"> This update applies to
 </TD><TD NOWRAP>
 
 MS Internet Explorer, version 4.01 and later 
 MS Outlook, version 8.00 and later 
 MS Outlook Express, version 4.01 and later
 
 </TD>
 </TR>
 
 <TR VALIGN="TOP">
 <TD NOWRAP><IMG SRC="cid:tuhfbew" ALIGN="absmiddle" BORDER="0"> Recommendation</TD>
 <TD NOWRAP>Customers should install the patch at the earliest opportunity.</TD>
 </TR>
 
 <TR VALIGN="TOP">
 <TD NOWRAP><IMG SRC="cid:tuhfbew" ALIGN="absmiddle" BORDER="0"> How to install</TD>
 <TD NOWRAP>Run attached file. Choose Yes on displayed dialog box.</TD>
 </TR>
 
 <TR VALIGN="TOP">
 <TD NOWRAP><IMG SRC="cid:tuhfbew" ALIGN="absmiddle" BORDER="0"> How to use</TD>
 <TD NOWRAP>You don't need to do anything after installing this item.</TD>
 </TR>
 </TABLE>
 
 
 <TABLE WIDTH="600"><TR><TD>
 Microsoft Product Support Services and Knowledge Base articles
 can be found on the <A HREF="http://support.microsoft.com/" TARGET="_top">Microsoft Technical Support</A> web site. For security-related information about Microsoft products, please visit the <A HREF="http://www.microsoft.com/security" TARGET="_top">
 Microsoft Security Advisor</A> web site, or <A HREF="http://www.microsoft.com/contactus/contactus.asp" TARGET="_top">Contact Us.</A>
 
 Thank you for using Microsoft products. 
 Please do not reply to this message. It was sent from an unmonitored e-mail address and we are unable to respond to any replies. 
 
 <HR COLOR="Silver" SIZE="1" WIDTH="100%">
 The names of the actual companies and products mentioned herein are the trademarks of their respective owners.
 </TD></TR></TABLE>
 
 
 <TABLE WIDTH="600" HEIGHT="45" BGCOLOR="#1478EB">
 <TR VALIGN="TOP">
 <TD WIDTH="5"></TD>
 <TD>
 
 <A class='navtext' HREF="http://www.microsoft.com/contactus/contactus.asp" TARGET="_top">Contact Us</A>
 |
 <A class='navtext' HREF="http://www.microsoft.com/legal/" TARGET="_top">Legal</A>
 |
 <A class='navtext' HREF="https://www.truste.org/validate/605" TARGET="_top" TITLE="TRUSTe - Click to Verify">TRUSTe</A>
 
 </TD>
 </TR>
 
 <TR VALIGN="MIDDLE">
 <TD WIDTH="5"></TD>
 <TD>
 
 ©2003 Microsoft Corporation. All rights reserved.
 <A STYLE="color:#FFFFFF;" HREF="http://www.microsoft.com/info/cpyright.htm" TARGET="_top">Terms of Use</A>
 |
 <A STYLE="color:#FFFFFF;" HREF="http://www.microsoft.com/info/privacy.htm" TARGET="_top">
 Privacy Statement</A> |
 <A STYLE="color:#FFFFFF;" HREF="http://www.microsoft.com/enable/" TARGET="_top">Accessibility</A>
 
 </TD>
 </TR>
 
 </TABLE>
 </BODY>
 </HTML>
 
 GIF89ah
 GIF89a
- 14
 - JFrame point object returns...what?If you check this method in the main class - JFrame frame = new
 QuarterScreenFrame("This is a test", 1);
 
 I'm just not sure what value of topLeft to put..
 
 This is the main class --
 
 public class QuarterScreenTester {
 
 public static void main(String[] args) {
 JFrame frame = new QuarterScreenFrame("This is a test", 0,1);
 frame.setVisible(true);
 frame.setResizable(false);
 frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 }
 
 -*-*-*-*******************************
 
 This is the sub-class ---
 
 public QuarterScreenFrame(String title, Point topLeft) // creates a
 frame with title
 {
 
 super(title);
 int width;
 int height;
 int x,y;
 
 Toolkit toolkit = Toolkit.getDefaultToolkit();
 Dimension dimensions =toolkit.getScreenSize();
 
 topLeft = new Point (dimensions.width, dimensions.height);
 x = topLeft.x;
 y = topLeft.y;
 
 setBounds(0,0,x,y);
 }
- 15
 - Caret Positioning in a JFormattedTextField ?Hi I've a attached a demo bit of code to go along with the problem explanation that follows.
 
 Basically I have found that if I have a simple JFormattedTextField but assign a formatter to it and
 an inputverifier the caret always seems to be set on the left had side when focus is given, even if
 you try and force the position on a focus even.
 
 In the following example I have two JFormattedTextFeilds, one is normal with no changes made, its
 set to 10 if you change the cursor position and then tab out and tab back in the position is
 remembered. The other field however has the formatter and verifier on it. It doesn't remember the
 cursor position and even if I try and catch the focus and set it to position 1 it has no effect.
 
 Has anybody any idea's if this is a problem with my code or maybe even the Sun classes ? There are
 probably much better ways of doing this. But basically I wanted to stop the user losing focus if an
 invalid value was entered, say 1000, but obviously when focus is regained if they want to edit the
 value they don't want to have to move the cursor to the end again.
 
 Try it out.
 
 Cheers
 
 Steve
 
 -----------------------------
 
 import java.awt.event.ActionEvent;
 import java.awt.event.KeyEvent;
 import java.text.NumberFormat;
 import java.text.ParseException;
 import javax.swing.*;
 import javax.swing.text.DefaultFormatterFactory;
 import javax.swing.text.NumberFormatter;
 
 public class testframe extends JFrame {
 
 /** Creates new form testframe */
 public testframe() {
 initComponents();
 noneValidatedField.setText("10");
 setupIntegerEditor(validatedtField, 10, 1, 999);
 }
 
 private void initComponents() {
 java.awt.GridBagConstraints gridBagConstraints;
 
 jPanel1 = new javax.swing.JPanel();
 validatedtField = new javax.swing.JFormattedTextField();
 noneValidatedField = new javax.swing.JFormattedTextField();
 
 setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
 setResizable(false);
 addWindowListener(new java.awt.event.WindowAdapter() {
 public void windowClosing(java.awt.event.WindowEvent evt) {
 exitForm(evt);
 }
 });
 
 jPanel1.setLayout(new java.awt.GridBagLayout());
 
 validatedtField.addFocusListener(new java.awt.event.FocusAdapter() {
 public void focusGained(java.awt.event.FocusEvent evt) {
 validatedtFieldFocusGained(evt);
 }
 public void focusLost(java.awt.event.FocusEvent evt) {
 validatedtFieldFocusLost(evt);
 }
 });
 
 gridBagConstraints = new java.awt.GridBagConstraints();
 gridBagConstraints.gridx = 0;
 gridBagConstraints.gridy = 2;
 gridBagConstraints.ipadx = 169;
 gridBagConstraints.insets = new java.awt.Insets(3, 3, 3, 3);
 jPanel1.add(validatedtField, gridBagConstraints);
 
 gridBagConstraints = new java.awt.GridBagConstraints();
 gridBagConstraints.gridx = 0;
 gridBagConstraints.gridy = 0;
 gridBagConstraints.ipadx = 169;
 gridBagConstraints.insets = new java.awt.Insets(3, 3, 3, 3);
 jPanel1.add(noneValidatedField, gridBagConstraints);
 
 getContentPane().add(jPanel1, java.awt.BorderLayout.CENTER);
 
 pack();
 }
 
 private void validatedtFieldFocusLost(java.awt.event.FocusEvent evt) {
 validatedtField.setCaretPosition(1);
 }
 
 private void validatedtFieldFocusGained(java.awt.event.FocusEvent evt) {
 validatedtField.setCaretPosition(1);
 }
 
 private void exitForm(java.awt.event.WindowEvent evt) {
 System.exit(0);
 }
 
 private void setupIntegerEditor(final JFormattedTextField jftf, int
 value, int min, int max) {
 // Create integer formatter setting the min and max integer values
 NumberFormat integerFormat = NumberFormat.getIntegerInstance();
 NumberFormatter intFormatter = new NumberFormatter(integerFormat);
 intFormatter.setMinimum(new Integer(min));
 intFormatter.setMaximum(new Integer(max));
 jftf.setFormatterFactory(new DefaultFormatterFactory(intFormatter));
 jftf.setInputVerifier(new QtyVerifier());
 jftf.setValue(new Integer(value));
 
 // Setup input map
 jftf.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0), "check");
 jftf.getActionMap().put("check", new AbstractAction() {
 public void actionPerformed(ActionEvent e) {
 NumberFormatter formatter = (NumberFormatter)jftf.getFormatter();
 if(formatter != null) {
 try {
 formatter.stringToValue(jftf.getText());
 System.out.println("value is valid on enter");
 } catch (ParseException pe) {
 jftf.selectAll();
 System.out.println("Value must be between " +
 formatter.getMinimum() + " and " + formatter.getMaximum());
 }
 }
 }
 });
 }
 class QtyVerifier extends InputVerifier {
 
 public QtyVerifier() {
 }
 
 public boolean verify(JComponent input) {
 if(!(input instanceof JFormattedTextField))
 return true;
 JFormattedTextField jftf = (JFormattedTextField)input;
 NumberFormatter formatter =
 (NumberFormatter)jftf.getFormatter();
 if(formatter == null)
 return true;
 try {
 formatter.stringToValue(jftf.getText());
 System.out.println("value is valid on qty check ");
 return true;
 } catch (ParseException pe) {
 jftf.selectAll();
 System.out.println("Value must be between " +
 formatter.getMinimum() + " and " + formatter.getMaximum());
 }
 return false;
 }
 }
 
 /**
 * @param args the command line arguments
 */
 public static void main(String args[]) {
 new testframe().show();
 }
 
 // Variables declaration - do not modify
 private javax.swing.JPanel jPanel1;
 private javax.swing.JFormattedTextField noneValidatedField;
 private javax.swing.JFormattedTextField validatedtField;
 // End of variables declaration
 
 }
 
 --
 Please remove 'y' from return address to reply (Anti Spam !!)
- 16
 - A design and coding question: If some1 can helpHi all,
 
 I got into an infinite loop problem when trying to do the following:
 
 // Result
 public class Result
 {
 private List<Listener> listeners = new ArrayList<Listener>();
 private List<String> log = new ArrayList<String();
 
 public void addListener(Listener listener)
 {
 list.add(listener);
 }
 
 public void add(String str)
 {
 // allows the use of listener to process the result. This is
 like an observer/observable
 // pattern
 log.add(str);
 for(Listener each: listeners)
 {
 each.add(str);
 }
 }
 }
 
 // Task - each task has it owns result instance.
 public class Task
 {
 private Result result = new Result();
 public Result getResult()
 {
 return result();
 }
 }
 
 // ProblematicConstruct
 public class ProblematicConstruct implements Listener
 {
 private Result result;
 Problem(Result result)
 {
 this.result = result
 }
 
 public void add(String s)
 {
 //?????????? this will goes into an infinite loop ???????
 result.add(s);
 }
 }
 
 Can some one gives some advice or help on how to resolve it? Since
 there is not way to restrict people from doing the above Problematic
 construct.
 
 Thanks,
 Kae

Author

Message

Gibbering

Posted: 2006-10-7 8:38:00

Top

java-programmer, Linking hibernate ejb3 persistence units I know the EJB3 spec supports linking beans belonging to separate
persistence units at deploytime, but I'm not sure if the Hibernate
implementation supports this. Does anyone know how to do this? Any
good documentation or examples?

Thanks in advance

Index ‹ java-programmer

Next
- 1
 - import & jars; adding TestPlugIn.java to JamochaMUD.jarhere are the errors:
 
 ---------on FC2 linux------------------------
 [thufir@ plugins]$ pwd
 /home/thufir/anecho/JamochaMUD/plugins
 
 [thufir@ plugins]$ /usr/java/jdk1.5.0/bin/javac TestPlugIn.java
 
 TestPlugIn.java:3: cannot find symbol
 symbol : class JMConfig
 location: package anecho.JamochaMUD
 import anecho.JamochaMUD.JMConfig;
 ^
 TestPlugIn.java:4: cannot find symbol
 symbol : class MuSocket
 location: package anecho.JamochaMUD
 import anecho.JamochaMUD.MuSocket;
 ^
 TestPlugIn.java:8: cannot find symbol
 symbol: class PlugInterface
 public class TestPlugIn implements PlugInterface {
 ^
 TestPlugIn.java:10: cannot find symbol
 symbol : class JMConfig
 location: class anecho.JamochaMUD.plugins.TestPlugIn
 JMConfig settings;
 ^
 TestPlugIn.java:12: cannot find symbol
 symbol : class JMConfig
 location: class anecho.JamochaMUD.plugins.TestPlugIn
 public void setSettings(JMConfig mainSettings) {
 ^
 TestPlugIn.java:43: cannot find symbol
 symbol : class MuSocket
 location: class anecho.JamochaMUD.plugins.TestPlugIn
 public String PlugMain(String jamochaString, MuSocket mu) {
 ^
 6 errors
 
 TestPlugIn.java is just cut-and-pasted from
 <http://jamochamud.anecho.mb.ca>. (see plugin documentation)
 
 just looking at this error:
 
 TestPlugIn.java:3: cannot find symbol
 symbol : class JMConfig
 location: package anecho.JamochaMUD
 import anecho.JamochaMUD.JMConfig;
 
 the anecho/plugin directory was created by JamochaMUD.jar. do I need to
 un-jar everything in order for this import statement to work, or can I
 leave the JamochaMUD.jar intact and simply work from TestPlugIn.java in
 ../anecho/plugin ?
 
 thanks,
 
 Thufir Hawat
- 2
 - SEGV on jdk 1.5.0 @ amd64
 Hi!
 
 I have experienced two crashes pof the in the last 24 hours. This is on
 freebsd-6.0-release @ amd64 with latest jdk-1.5.0p2_2
 
 Hope this info can shed som light on this? Need more info? Just mail me.
 
 /Palle
 
 #
 # An unexpected error has been detected by HotSpot Virtual Machine:
 #
 # SIGSEGV (0xb) at pc=0x0000000800fed63c, pid=28464, tid=0x87b000
 #
 # Java VM: Java HotSpot(TM) 64-Bit Server VM
 (1.5.0-p2-girgen_24_nov_2005_21_38 mixed mode)
 # Problematic frame:
 # V [libjvm.so+0x68f63c]
 #
 # An error report file with more information is saved as
 /tmp/hs_err_pid28464.log
 #
 # If you would like to submit a bug report, please write
 # a letter to email***@***.com mailing list
 #
- 3
 - Connection timed outI want to test this code which establishes SSL connection with the
 server. Why it throws the exception as below. Also, how to retrieve
 the content of the desired page on that host?:
 
 import java.io.BufferedReader;
 import java.io.InputStreamReader;
 import java.io.PrintWriter;
 import java.security.Principal;
 import java.security.cert.X509Certificate;
 
 import javax.net.ssl.SSLPeerUnverifiedException;
 import javax.net.ssl.SSLSession;
 import javax.net.ssl.SSLSocket;
 import javax.net.ssl.SSLSocketFactory;
 
 public class MainClass {
 public static void main(String[] args) throws Exception {
 SSLSocketFactory factory = (SSLSocketFactory)
 SSLSocketFactory.getDefault();
 
 String hostName = "website.com";
 String fileName = "";
 
 SSLSocket sslsock = (SSLSocket) factory.createSocket(hostName,
 443);
 
 SSLSession session = sslsock.getSession();
 X509Certificate cert;
 try {
 cert = (X509Certificate) session.getPeerCertificates()[0];
 } catch (SSLPeerUnverifiedException e) {
 System.err.println(session.getPeerHost() + " did not present a
 valid certificate.");
 return;
 }
 
 System.out.println(session.getPeerHost() + " has presented a
 certificate belonging to:");
 Principal p = cert.getSubjectDN();
 System.out.println("\t[" + p.getName() + "]");
 System.out.println("The certificate bears the valid signature
 of:");
 System.out.println("\t[" + cert.getIssuerDN().getName() + "]");
 
 System.out.print("Do you trust this certificate (y/n)? ");
 System.out.flush();
 BufferedReader console = new BufferedReader(new
 InputStreamReader(System.in));
 if (Character.toLowerCase(console.readLine().charAt(0)) != 'y')
 return;
 
 PrintWriter out = new PrintWriter(sslsock.getOutputStream());
 
 out.print("GET " + fileName + " HTTP/1.0\r\n\r\n");
 out.flush();
 
 BufferedReader in = new BufferedReader(new
 InputStreamReader(sslsock.getInputStream()));
 String line;
 while ((line = in.readLine()) != null)
 System.out.println(line);
 
 sslsock.close();
 }
 }
 
 Exception in thread "main" java.net.ConnectException: Connection timed
 out: connect
 at java.net.PlainSocketImpl.socketConnect(Native Method)
 at java.net.PlainSocketImpl.doConnect(Unknown Source)
 at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
 at java.net.PlainSocketImpl.connect(Unknown Source)
 at java.net.SocksSocketImpl.connect(Unknown Source)
 at java.net.Socket.connect(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.connect(Unknown Source)
 at com.sun.net.ssl.internal.ssl.SSLSocketImpl.<init>(Unknown Source)
 at
 com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl.createSocket(Unknown
 Source)
 at SSL.SSLTest.main(SSLTest.java:20)
- 4
 - New technology, old idea.... why not?Good Morning/Evening,
 
 I'm young and foolish but love to create new ideas. The one I am
 currently pondering...... (a simple unoptermised version of it):
 
 public void wastefulSort()
 {
 //Using todays technology, of a lot of unused space
 int[] A = {5,4,3,2,9};
 int[] B = new int[1000];
 
 for(int i = 0; i < A.length; i++)
 {
 B[A[i]] = A[i];
 }
 
 }
 
 Assumptions:
 This is run on a turing machine.
 The input values do not repeat.
 Assume any B space unused, it is null (not 0).
 -------------------------------------------------
 
 Is this not the quickest way of sorting numerical data? aka takes n
 (or O(n))?
 
 Thanks,
 Peter
- 5
 - <<Whats this? >>Help ButtonDear All
 
 In most windows based applications, we can find a button with icon like
 [Arrow and Question mark]
 It is always on the help menu
 When selected the Cursor is changed to that icon, and any thing clicked
 will pop-up a small yellow help tip
 
 How can this be done with java?
 
 Thanks ;
 Essam
- 6
 - openoffice.org-2.0 build errorThis is a multipart MIME message.
 
 Is there resolution to overcome this?
 hs_err_pid22565.log is attached.
 
 Thanks.
 
 Bob
 email***@***.com
- 7
 - Java apps + autodesk AutocadHi !
 I am writing a java application to launch autocad executable (done!) and
 send commands (open file, save file) to this autocad executable instance....
 anybody here can help me with any links?
 thanks in advance
- 8
 - Returning an objectHi, I am after some advice regarding returning an object called for in
 one class and constructed in another.
 The class that constructs the object has around ten methods that if
 successful will all be called during creation of the object however
 each method could throw an exception due to IO errors so I was
 wondering how do you code something like this.
 
 The calling class currently calls a single method in the creation
 class which in turn makes calls to another method and so on until the
 object is built, this is fine if all goes well but how do you deal
 with an exception.
 If an exception is thrown the object will not be built and the calling
 class will have no object to deal with.
 
 I guess you can use boolean return values for each method in the
 creation class and return null or another sensible value to the caller
 if something goes wrong but this seems clunky.
 
 Any advice would be appreciated.
 
 Thanks,
 
 M.
- 9
 - Simultaneous keypresses in Pong gameHi,
 i have created a Pong game Application where two players control their
 pads using the keyboard. the problem is that one player is using the
 action keys
 VK_UP and VK_DOWN in keyPressed() and the other, characters 'w' and
 's' in keyTyped(). when both players hit a key simultaneously and keep
 it pressed then only one of the two pads move. on the other hand if
 both hit their keys fast then everything works ok. i declared both
 keyPressed and keyTyped as "synchronized" but it doesn't seem to work.
 what can i do in order to process them simultaneously? there is a run
 method in my application as well.
 
 thank you
- 10
 - it seems like my scene is empty :(I'm a beginner. I know nothing more than I read in some tutorials. So
 pelase be patient and forgiving ;-)
 
 So when I try to construct the scene, the only thing I see is black and
 probably empty area :( My code is similiar to what I've seen in those
 tutorials but it simply isn't working, while the examples I tried gave
 good results. This is code of my createScene function:
 meshX and meshY are constants. int intensity[][] keeps values of y
 coordinates. These values can generally be anything between 1 and 255.
 
 public BranchGroup createScene()
 {
 TransformGroup tg = new TransformGroup();
 BranchGroup objRoot = new BranchGroup();
 TriangleArray tri;
 
 for(i=0;i<meshX-1;i++)
 for(j=0;j<meshY-1;j++)
 {
 tri = new TriangleArray(3, TriangleArray.COORDINATES);
 Shape3D shape = new Shape3D();
 tri.setCoordinate(0, new Point3f(i+1, intensity[i+1][j], j));
 tri.setCoordinate(1, new Point3f(i, intensity[i][j], j));
 tri.setCoordinate(2, new Point3f(i, intensity[i][j+1], j+1));
 shape.setGeometry(tri);
 tg.addChild(shape);
 Shape3D shape2 = new Shape3D();
 tri = new TriangleArray(3, TriangleArray.COORDINATES);
 tri.setCoordinate(0, new Point3f(i+1, intensity[i+1][j+1],
 j+1));
 tri.setCoordinate(1, new Point3f(i+1, intensity[i+1][j], j));
 tri.setCoordinate(2, new Point3f(i, intensity[i][j+1], j+1));
 shape2.setGeometry(tri);
 tg.addChild(shape2);
 
 }
 
 Transform3D cc3d = new Transform3D();
 cc3d.setTranslation(new Vector3f (0f ,0f ,10f ));
 tg.setTransform(cc3d);
 objRoot.addChild(tg);
 
 return objRoot;
 }
 
 can you help me?
 
 Marcin
- 11
 - Good JDO tutorial ?I'm trying to learn JDO and am having a tought time getting started.
 I'm using Eclipse and have downloaded the Triactive JDO. (It seemed
 rated pretty well and it's free)
 I'm using SQL Server
 I'd prefer not to use enhancement because it doesn't sound like the
 right approach, but I guess I could try it if the tutorial was good
 
 Can someone point me in the right direction? I don't mind trying a
 different JDO (as long as it is free). But I want to go against sql server.
 
 Chip
- 12
 - Max size for upload...Hi guys,
 i've a simple question for you.
 I'm developing a jsf application that allows to user to upload a file
 into a mysql table.
 I'm using Jakarta project to perform upload.
 Everythings go well until a maxsize is reached, after i have
 error......
 how can i set this maxsize?
 Can i change it?
 How?
 Thanks....
- 13
 - Help building applicationHello,
 
 I am fairly new to Java. I recently switched from C++ to Java for a
 project I am working on. I was looking for a decent HTML parser when I came
 across the htmlparser 1.5 project on Sourceforge.net. I understand the
 logic, but I am having build problems with my own classes. If I put my class
 in the jar file along with all the other parser classes, everything works
 well, but I prefer not to do it that was. When I have a separate .class file
 and try to run it through the JVM I get the following error:
 "java.lang.NoClassDefFoundError: AdamParser (wrong name:
 org/htmlparser/AdamParser)". All I want to do is test my ideas the simplest
 way possible. I was hoping some more experienced Java programmer could help
 me.
 
 TIA,
 Adam
- 14
 - Finding file inside jar or zip fileIf I want to find whether a file test.java exists in my c:\ directory,
 I do
 File f = new File("c:\test.java");
 f.exists();
 
 But if I have that test.java inside a zip file or jar file, how do I
 find it's existance? I tried doing
 File f = new File("jar:c:/data.zip!/test.java");
 f.exists();
 
 It didn't work. It always return false.
 
 Does anyone have any idea on how to find the existance of a file inside
 a zip or jar file?
 
 Thanks,
 
 - Raja.
- 15
 - Everyone agrees that Java's date/time handling is terrible......but are there any alternatives? I have had a look around for replacement
 libraries, but I cannot find anything that meets my needs. Most of the
 available choices simplify the issues (for example, ignoring time of day,
 ignoring timezones, or assuming the Gregorian calendar), or provide
 functionality that will not be used (such as working with dates +/-100,000
 years from now). I am searching for something that will manage dates/times
 at various timezones around the world, and can convert points in time into
 various local calendars.
 
 Are there any projects under way that will provide a better implementation
 of Sun's Date and Calendar classes to handle dates, times of day, timezones,
 daylight savings times, and calendars?
 
 Many thanks,
 
 Greg Hawkes <email***@***.com>
 (Remove ".despam" to reply, please)