| stable java environment on FreeBSD 5.2-RELEASE |
|
 |
Index ‹ java-programmer
|
- Previous
- 3
- 3
- A constructive debate: Eclipse or NetBeans?On Mon, 15 Oct 2007, Jon Harrop wrote:
> > Anyway, I agree partially that Eclipse workspace creation should be
> > easier. I even filed a bug about the fact that you cannot create a fully
> > working workspace programmatically and then just use it. Eclipse writes a
> > lot of workspace-specific caches that don't work even inside the same
> > workstation, let alone after porting them to another user. (And it's even
> > an error to call them caches if Eclipse won't invalidate them when they
> > are outdated.)
>
> Ugh. Just me trying it here for the time being though. :-)
I didn't quite understand. Let me clarify what I said, just in case you
thought I was talking about something people do every day with Eclipse:
I meant it's virtually impossible to create a _whole_ workspace (with
Eclipse, plugins, projects, settings, just press play on tape...)
programmatically. Individual project settings (and a lot of them) can be
commited to version control and many typical settings work out of the box
after checking them out.
> I'll give it a go. I've read a lot of conflicting advice about installing
> libraries though. A lot of people say just copy the .jar's
> into .../jre/lib/ext/ and the .so's into .../jre/lib/amd64/ but the
> official documentation warns against this for non-specific reasons. In the
> end, I ignored the advice of the official JOGL docs and installed it by
> hand. Compiling and running JOGL demos is easier now but most of them still
> don't work.
I have never written anything under the jre/jdk directory. The whole
thought of stabbing installed software makes me feel sick :)
Fortunately, I don't think there's ever any need for that, either.
- Ville Oikarinen
- 4
- Unexpected signal: 11 [Was: Sun JDK 1.4.2_01 for Linux]> Is it just my imagination or is the Sun JDK 1.4.2_01 for Linux
> (java/linux-sun-jdk14) stable and very well performing? On my FreeBSD
It was just my imagination ;-) See below for the error message I got seconds
after I started up my application server and executed no more than 3
requests:
Unexpected Signal : 11 occurred at PC=0x2A6BD991
Function=[Unknown.]
Library=(N/A)
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
Dynamic libraries:
Can not get information for pid = 21338
Heap at VM Abort:
Heap
def new generation total 576K, used 138K [0x2c760000, 0x2c800000,
0x2cc40000)
eden space 512K, 24% used [0x2c760000, 0x2c77ee30, 0x2c7e0000)
from space 64K, 23% used [0x2c7e0000, 0x2c7e3b78, 0x2c7f0000)
to space 64K, 0% used [0x2c7f0000, 0x2c7f0000, 0x2c800000)
tenured generation total 3036K, used 2298K [0x2cc40000, 0x2cf37000,
0x30760000)
the space 3036K, 75% used [0x2cc40000, 0x2ce7e870, 0x2ce7ea00,
0x2cf37000)
compacting perm gen total 5376K, used 5140K [0x30760000, 0x30ca0000,
0x34760000)
the space 5376K, 95% used [0x30760000, 0x30c653f8, 0x30c65400,
0x30ca0000)
Local Time = Fri Sep 12 16:50:59 2003
Elapsed Time = 194
#
# HotSpot Virtual Machine Error : 11
# Error ID : 4F530E43505002EF
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
#
# Java VM: Java HotSpot(TM) Client VM (1.4.2_01-b06 mixed mode)
#
# An error report file has been saved as hs_err_pid21314.log.
# Please refer to the file for further information.
_______________________________________________
email***@***.com mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-java
To unsubscribe, send any mail to "email***@***.com"
- 4
- JSP upload - detecting file type by mime type? what is application/octet-stream?I'm uploading a file via servlets or JSP, using the O'Reilly
MultipartWrapper, and was hoping that to be able to determine the file
type (eg. Excel spreadsheet, Word document, Powerpoint, PDF) depending
on the Mime Type.
Simple enough using the O'Reilly servlet package ~
<%@ page import="com.oreilly.servlet.*" %>
<%
if (request instanceof MultipartWrapper) {
try {
// Cast the request to a MultipartWrapper
MultipartWrapper multi = (MultipartWrapper)request;
// The file upload field on the submitting form is called
'upfile'.
String mimeType = multi.getContentType("resourcefile");
...
%>
Strange thing though is that I'm not getting the expected Mime Type.
For example, I just uploaded a Microsoft Word document and the
mimeType String is "application/octet-stream" instead of the expected
"application/msword".
However, uploading Excel spreadsheets and PDF files provided the
expected results of "application/vnd.ms-excel" and "application/pdf".
(see http://www.bc.edu/bc_org/tvp/email/helpers.shtml or
http://www.yolinux.com/TUTORIALS/LinuxTutorialMimeTypesAndApplications.html
for lists of mime types)
So, does anybody know why the Microsoft Word documents send the wrong
mime type ? Should I instead just use the file extension to determine
file type perhaps ?
Thanks in advance,
Stephen
- 5
- JDK BSD NewBeeHi all,
I'm a BSD newbie with a couple of simple questions.
Does the 1.4 jdk implementation implement the hotspot optimizer? And
are the threads green or native - and what is the difference? I've
read that the jdk1.3 binary does not implement hotspot and uses green
threads and I'm trying to decide if upgrading to the jdk 1.4 will
improve my servlet application's performance.
Also, I've noticed that there are ports for things like tomcat and
other java third party extensions. Can anyone tell me the difference
between the ports version and those that I would download from say
jakarta.apache.org? I've compiled mod_jk from the apache source using
the mac os X compile instructions, as those were the only that I could
get to work, will my compiled mod_jk work better if I use the ports?
I'm new to the ports system as I come from the land of RedHat LInux and
Mac OS X.
Thanks for all of your help.
Alden
Add Content Now
Offering a fun and interactive way to transform
your site content single handedly.
http://www.addcontentnow.com
303.279.2023
_______________________________________________
email***@***.com mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-java
To unsubscribe, send any mail to "email***@***.com"
- 5
- Waiting For A Synchronized MethodSay thread1 begins executing a synchronized method.
While it's executing, both thread2 and thread3 call the synchronized
method, in that order.
When thread1 ends executing and gives up its lock, is thread2
guaranteed to execute next (because it's been waiting longer than
thread3), or is it possible that thread3 executes first?
My experiments seem to point to thread2 always running first in the
above situation, but I'd like to verify this.
Thanks,
John
- 9
- Recommend a good programming environment for beginner?Howdy. I'm taking a java class, and they unfortunately just have us
using the DOS cmd liine and notepad to program. I'd like to use a good
environment. I used to use Codewarrior. Netbeans came with the Java
download from Sun, but it overwhelmed me, seems like I'd have to invest
a lot in learning it. Does anybody know of a sleeker, easier to get
used to environment?
Alternatively, anyone know of a good, simple, easy to follow tutorial
to get one up an running in netbeans?
Thanks a heap....
Bill J.
- 9
- US-CA: San Rafael, Full time Java-PL/SQL programmer.Working as a team member of the I.S. group, develops, integrates, and
supports applications.
Primary Responsibilities:
* Conversion of Servlets/JSP to Swing based applications.
* Converting logic from procedures/packages in Oracle to Java.
* Maintenance of code.
* User training/support.
* Ability to work on multiple projects simultaneously.
* Research, evaluate, and implement new 3rd party software packages.
Requirements:
* 2-3 years industry level experience in the following Java
technologies: Swing, JSP, Servlet, JDBC, RMI, EJB.
* 1-2 years industry level experience in Oracle 8i (or greater) which
includes writing PL/SQL procedures, packages and triggers.
Position Type:
* Full Time.
Company Location:
* San Rafael, California, USA.
Restrictions:
* This is not an entry level position.
* No thrird party companies.
* Sorry No H1Bs visa holders.
Email resume to is0871 at gmail.com
- 10
- Looking for Feedback on New Project - ChaiDBHi,
I'm one of the developers working on a new project: ChaiDB.
I am trying to get feedback on it, and looking to see if there might
be a good fit for your projects. We're currently exploring ways we
can add functionality to ChaiDB such as an indexing mechanism for
caching web data. I would appreciate any feedback/advice I could get
from this group and if you are interested, you can find details at
http://chaidb.sourceforge.net Below is a brief description of the
project.
ChaiDB is an embedded database developed at the kernel level using
Java and B-Tree implementation for data storage. It's very simple to
use without any administrative overhead for high performance read/
write operations. It provides Java, JCA, JTA interfaces and database
administration tools such as backup and restore, etc. ChaiDB is ideal
for applications utilizing caching, archiving, queuing and buffering
capabilities.
Thanks,
Jim
- 12
- Ant multi OS <exec> adviceHi,
I have the following Ant code which I would like to also use on Linux:
<target name="build.XmlJaxb">
<exec dir="${checkout.dest}/XmlJaxb" executable="cmd">
<arg line="/C ant -logger org.apache.tools.ant.XmlLogger
-logfile ant_log_dist.xml dist" />
</exec>
</target>
For Linux I woul dneed to replace "cmd" and "/C" with "bash" or something?
I know there is the <exec> OS option but then I would need to copy the
<exec> tags with a Windows and Linux version. Gives maintenance errors.
I know I could make variables for "cmd" and "/C" and use the <if>
contrib to look at the os Java system property.
I cannot use <ant> task because I do not seem to be able to specify the
Xml logger and the output file.
any ideas?
thanks,
Peter
- 13
- array initilization and memory usageI'm a little new here, so please bear with me if this sounds like a
goofy
question!...
let's say that I have an class with 15 or so members, each taking up a
fair
amount of space - we'll call this class bars
If I create an array of 400 empty bars objects, but only instantiate
the
first five or so then am I still setting aside the memory for the other
395?
I hope that made sense!
Thanks
- 13
- [Update] FreeQueryBuilder 2005.03FreeQueryBuilder 2005.03 is now available!
(http://querybuilder.sourceforge.net/)
With FreeQueryBuilder, you can create SQL queries without directly
writing SQL.
A diagram pane presents a graphic display of the tables you have
selected from the data connection.
It also shows any join relationships among them. When you make a change
in the diagram pane,
the SQL-Syntax pane are updated to reflect your change.
You can:
* Add or remove tables and specify data columns for output.
* Create,remove or modify joins between tables.
* Run a preview window.
And specify:
* Expressions for calculated columns.
* The sort order for the query.
* Search conditions.
* Grouping criteria.
Included:
* JDBC Administrator.
* Metadata search.
* Command editor.
* Queries history.
Works with any JDBC compliant database, including : ORACLE, MS
SQLServer, MySQL, FiREBiRD and HSQLDB.
Please give it a try and let me know if you have any problems or ideas
for features.
Thanks, Nickyb
- 14
- Changing the value of Boolean?Sure I've read somewhere (but can't find it now) that you cannot change the
value of a Boolean tyep variable. You have to set it each time like this -
////////////////////////////////////////////////////////////
Boolean b = new Boolean(true);
b = new Boolean(false);
////////////////////////////////////////////////////////////
Is this correct?
thanks
harry
- 16
- Creme 3.27 and AWT framesHi!
I working on a problem. We have an application in which a signature can
be captured. This works perfectly on a PDA (Windows CE, Creme 3.25) but
since the upgrade to Windows CE Second Edtion, Creme 3.27 it fails to
work.
The problem is, the created frame will not be shown after the
frame.show() method. It looks like this thread is killed because the
code after the frame.show() isnt executed.
The (partial) code:
frame = new Frame();
frame.setBackground(Color.white);
frame.setSize(dimension);
saveButton.setLabel("Save");
saveButton.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(ActionEvent e)
{
saveButton_actionPerformed(e);
}
});
frame.add(saveButton, BorderLayout.NORTH);
clearButton.setLabel("Clear");
clearButton.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(ActionEvent e)
{
clearButton_actionPerformed(e);
}
});
frame.add(clearButton, BorderLayout.SOUTH);
frame.show();
frame.addMouseMotionListener(this);
frame.addMouseListener(this);
frame.addWindowListener(this);
}
//////////////////
frame.pack() before frame.show() doesnt help, frame.setVisible(true)
instead of frame.show() doesnt help. Anyone an idea ?
- 16
- reading a skingle key without pressing ENTER afterDenis wrote:
> Maybe I could write my own read() function
> deal with all backspace pressed etc...
>
> How do I read then a single key in Java?
> So it'll get just one keystroke and return key value
> without presing ENTER ?
You can't - that's the source of the problem and where
all attempts at a solution will fail.
|
| Author |
Message |
gbergling
|
 Posted: 2004-1-28 2:08:00 |
Top |
java-programmer, stable java environment on FreeBSD 5.2-RELEASE
--lrZ03NoBR/3+SXJZ
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
Hi freebsd-java@,
I would like to setup a stable java environment on a FreeBSD 5.2-RELEASE
system. The primary goal for this is to coding java programs with
eclipse. I have read all information I found on google.com and
freebsd.org/java, but I don't get all answers for the questions I have.
;)
I had tried the installation of jdk-1.3 but the only version I get to
work was the 'linux-sun-jdk1.3'. I am a little bit confused about these
many versions around. So here are the questions. :)
1. Which JDK you'll prefer on a 5.2-R focused on stability?
2. Which steps are needed to install the prefered JDK?
3. Are there issues on the threading model (kse||thr)?
best regards,
Gordon
--=20
Gordon Bergling <email***@***.com> http://www.0xFCE3.net/
PGP Fingerprint: 7732 9BB1 5013 AE8B E42C 28E0 93B9 D32B C76F 02A0
RIPE-HDL: MDTP-RIPE "There is no place like 127.0.0.0/8"
--lrZ03NoBR/3+SXJZ
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (FreeBSD)
iD8DBQFAFqimk7nTK8dvAqARAoeMAKDB+vdwZbTJhz1AjClDXc1Vnb4hrwCePxY1
LWCoKOXfwQQUt5P8dr4cxKc=
=UQ5f
-----END PGP SIGNATURE-----
--lrZ03NoBR/3+SXJZ--
|
| |
|
| |
|
| |
|
Index ‹ java-programmer |
- Next
- 1
- Regular Expression extract all links in a page.I am trying to extract all urls for a perticular page, but without a
success.
java.util.regex.Pattern p = Pattern.compile("<a
href=\"http://(.*)\">",Pattern.MULTILINE);
java.util.regex.Matcher m = p.matcher(strhtmpage);
while ( m.find() )
{
System.out.println( "LINKS: " + m.group(1) );
}
- 2
- Cannot load image in applet after placing it in a packageThis has been a much discussed topic in several newsgroups, but I still
cannot figure it out.
I got this class: htmledit.class. Normal website linking to this class as an
applet. Several image files (gif&bmp) for toolbar images.
/
| -htmledit.class
|
|-image1.gif
\-image2.gif
Applet loads, no problem. images are used in the toolbar. Applet tag calls
"htmledit.class"
Trying to get the class in a package (due to OO reasons and java 1.4 jdk) I
get:
/
|-/main
| \-htmledit.class
|
|-image1.gif
\-image2.gif
Changed the header of the htmledit.class to main package, changed the html
code to call the class "main.htmledit.class". Applet loads, get null values
from getResource() call. No images are loaded.
This applet is not (yet) part of a jar file. Tried copying the image files
to the main directory, add codebase, place them in a jar with archieve
attribute in the applet tag, calling image file with a "/" in front of it.
Why is the main applet class no longer able to access the image files when
placed in a package?
G
- 3
- 4
- JBoss/Tomcat or sth else?I greet,
(sorry for my english language + translator)
In relationship from this that I would like to learn to programme in
J2EE my
question is such:
I from what server should begin science JBoss / Tomcat or another one.
It what server was it been proper was to learn at the beginning if in
I would like to look for near future work as programmer Java.
Programming J2SE, applets is me already familiar { in some part
obviously). And even dust already first (rather successful) start take-
off from J2EE /
JavaMail :P and I tried to create own JSP + servlet'y.
As well as second question, what technology/framework to learn on
beginning and what of them are uses in work. I read recently
post that it does not it bribe to learn Struts'a because oneself him
already rather it
it uses.
Spring, Struts, Seam, Hibernate, JSF, EJB3.0, SOAP, RMI ... ?
I will add that they wake up that the technology of realization be
dependent on
from project.
- 5
- 6
- J2ME: Transferring RMS Data from Emulator to Mobile DeviceWe are planning to use the RMS to store our mobile application's
resource data (plain text), which are mainly used for populating the
drop downs (a.k.a. Choice Group) in the GUI. We have a lot of files
that need to be deployed with the mobile application. One of them has a
size of about 300K! It is fast to just download the file(s) via http.
However, it takes a very long time to process the downloaded data. By
"process", I mean by first storing the downloaded data in an RMS record
store and then place the data to different RMS record stores according
to certain criteria. We do this "process" because the requirements
state that we cannot show hundreds of data item in the drop downs at
any given instance for the sake of usability.
I would like to know if it is possible for us to use the J2ME emulator
to first load the resource data into the emulator's RMS, and then
deploy the emulator's RMS to the mobile device. If possible, how to do
it?
Thanks!
Simon.
- 7
- Robot.java low level help followupMy quest to emulate Robot.java in C# continues......
I was not able to use SendKeys, SendInput, keybd_event, or the
WH_JOURNALPLAYBACK hook to reproduce Robot.java's key sending ability
for apps that poll the asynch key state.
Since I was not able to get any info about the low-level code
Robot.java uses to execute the keyPress and keyRelease methods (any
info still appreciated :) ), I ended up creating a java app that runs
minimized that has a socket to accept keys, and uses robot.java to
send them. Any app of any kind can send the keys to this app and
utilize Robot.java's functionality.
Hope this info helps someone looking to use the wonderful Robot.java
in another platform.
- 8
- WebSphere 4.0 and VisibrokerI have written an application that uses Visibroker to communicate with
a remote CORBA server. I have put the vbjorb.jar and other required
JARs under WEB-INF/lib. However, since vbjorb.jar contains classes
also contained in rt.jar, I also add the WEB-INF/lib directory to ws.ext.dirs.
This WSAD configuration works just fine. This is WebSphere 4.0
application.
However, when I attempted to deploy my application to WAS 4.0, I
persistently got a NoClassFoundError. Adding a ws.ext.dirs system
directory specifying the directory containing the JARS didn't yield the desired
effects. Even specifying the absolute directory path did not work.
Is there some other "trick" in order to deploy such an application
successfully to WAS 4.0?
Thx!
Panagiotis Varlagas
email***@***.com
- 9
- development speed of struts is low?Hi
When i change my action class, struct-config.xml, i need to
restart tomcat, it will highlt affect my development speed. How to fix
this problem?
thanks
from Peter (email***@***.com)
- 10
- Best Friends Decide To Get Fucked Together For The First Time Just few link on some movies...
All just for you...
Download
>>>>> http://download-video.12w.net
>>>>> http://world-sex.urllogs.com
>>>>> http://video-sex.12w.net
CLICK FREE DOWNLOAD VIDEO PORN...
L
I
C
K
T
O
W
A
T
C
H
V
I
D
E
O
P
O
R
N
D
O
W
N
L
O
A
D
F
R
E
E
.
.
.
W
E
L
C
O
M
T
O
M
O
V
I
E
S
P
O
R
N
D
O
W
N
L
O
A
D
.
.
.
- 11
- Pros and Cons of Static MethodsOkay, I'm in a debate over whether or not static methods are a good idea in
a general domain class.
I'm personally not a fan of static methods but we seem to be using them to
load an object. For example if you have an Employee class rather then
instantiating an instance you call a static method 'GetEmployees' and it
returns a List of Employee objects.
I'm looking for what other people are doing and if you feel this is a good
or bad idea.
Thanks
- 12
- Failover pattern
2 or more hosts, each running the same application.
Each Java application on each host is assigned a specific task.
Say:
App on host1 does task X
App on host2 does task Y
App on host3 does task Z
Only one app can do any specific task.
Now, if app on host1 shutsdown for whatever reason, either app on host2 or host3 should take over task X.
I was thinking of implementing this with UDP ... but someone may have already done this ... without using a database.
Is there a design pattern for the above ... basically a failover pattern ?
- 13
- Please help! SecurityFilter redirects to login page again...Hi All I ha e a problem around authenticating ith Securit Filter and can t see the reasons Container is Tomcat 5 5 9 The problem is: After successful authentication response is the login page again although form default page propert is a redirect jsp for securit filter here I redirect users to the proper role s starting page If I input and send user information again the redirect orks properl Just for the second time I can t see the reasons I ha e alread used securit filter and ha en t had this error there I ha e debugged redirect jsp and could see that on the line response sendRedirect basePath admin inde jsp has run but the result is the login page again When I tr to access some resources ithin the protected area after authentication the redirect is correct The abo e described error e ists onl hen I tr to do a direct login and hope to be redirected to the form default page An idea please ? redirect jsp s running section: < @ page language= ja a import= ja a util pageEncoding= iso 8859 2 > < String path = request getConte tPath ; String basePath = request getScheme : request getSer erName : request getSer erPort path ; if request isUserInRole admin response sendRedirect basePath admin inde jsp ; S stem out println basePath admin inde jsp ; else if request isUserInRole modifier response sendRedirect basePath modifier inde jsp ; else if request isUserInRole inquirier response sendRedirect basePath inquirier inde jsp ; else response sendRedirect basePath inde jsp ; > securit filter config ml: <? ml ersion= 1 0 encoding= ISO 8859 1 ?> < DOCTYPE securit filter config PUBLIC Securit Filter org DTD Securit Filter Configuration 2 0 EN http: securit filter org dtd securit filter config_2_0 dtd > <securit filter config> < securit konfiguracio START > < admin resources START > <securit constraint> < eb resource collection> < eb resource name>Admin resources< eb resource name> <description> accessible b authenticated users of the admin role< description> <url pattern> admin < url pattern> <http method>GET< http method> <http method>POST< http method> <http method>PUT< http method> <http method>DELETE< http method> < eb resource collection> <auth constraint> <description>These roles are allo ed access< description> <role name>admin< role name> < auth constraint> < securit constraint> < admin resources END > <login config> <auth method>FORM< auth method> <realm name>lm realm< realm name> <form login config> <form login page> inde jsp< form login page> <form error page> inde jsp?badpass =Y< form error page> <form default page> redirect jsp< form default page> < form login config> < login config> <securit role> <description>admin role has access to this eb application< description> <role name>admin< role name> < securit role> <realm className= org securit filter realm catalina CatalinaRealmAdapter > <realm className= org apache catalina realm JDBCRealm > <realm param name = dri erName alue= com microsoft jdbc sqlser er SQLSer erDri er > <realm param name = connectionURL alue= jdbc:microsoft:sqlser er: 127 0 0 1:1433;DatabaseName=db_licenceman ager;User=m user;Pass ord=m pass ord;SelectMethod=cursor > <realm param name = connectionName alue= m user > <realm param name = connectionPass ord alue= m pass ord > <realm param name = userTable alue= users > <realm param name = userNameCol alue= user_name > <realm param name = userCredCol alue= pass ord > <realm param name = userRoleTable alue= user_roles > <realm param name = roleNameCol alue= role_name > < realm> < <realm className= org apache catalina realm Memor Realm > > < securit konfiguracio END > < securit filter config> eb ml: <? ml ersion= 1 0 encoding= ISO 8859 1 ?> < DOCTYPE eb app PUBLIC Sun Micros stems Inc DTD Web Application 2 3 EN http: ja a sun com dtd eb app_2_3 dtd > < eb app> < filter: securit filter konfiguracio START > <filter> <filter name>Securit Filter< filter name> <filter class>org securit filter filter Securit Filter< filter class> <init param> <param name>config< param name> <param alue> WEB INF securit filter config ml< param alue> < init param> <init param> <param name> alidate< param name> <param alue>true< param alue> < init param> < filter> < map all requests to the Securit Filter control hat it does ith configuration settings > <filter mapping> <filter name>Securit Filter< filter name> <url pattern> < url pattern> < filter mapping> < filter: securit filter konfiguracio END > <ser let> <ser let name>action< ser let name> <ser let class>org apache struts action ActionSer let< ser let class> <init param> <param name>config< param name> <param alue> WEB INF struts config ml< param alue> < init param> <init param> <param name>debug< param name> <param alue>3< param alue> < init param> <init param> <param name>detail< param name> <param alue>3< param alue> < init param> <load on startup>0< load on startup> < ser let> <ser let mapping> <ser let name>action< ser let name> <url pattern> do< url pattern> < ser let mapping> < eb app> Thanks in ad ance Peet
- 14
- Can someone explain this to me?Hello,
I have a very strange problem here. I have found the solution, but I would
like to know what is happening.
I load a file from a JAR file, using the following code :
InputStream stream=this.getClass().getResourceAsStream(name);
if (stream!=null)
{
int size=stream.available();
byte data[]=new byte[size];
stream.read(data);
}
stream.available() returns the correct size, the size of the file in the jar
file (0x1610E).
But the above code does not work! Only the first 0x3111 bytes of the stream
are read, the rest of the array is still 0!
But it works if I do the following code !
int c;
for (c=0; c<size; c++)
{
data[c]=(byte)stream.read();
}
Could it be that the stream cannot handle such a massive data output at
once?
Have you got any idea about this?
Thanks!
- 15
- Determining interface implementations during runtime ?Hi All,
Hope all is going well!
I was wondering if anyone had any ideas how I might be able to determine
reasonably efficiently what implementations of a given interface are
available within the current scope of available jars/classfiles during
runtime in my application?
Anyone done something like that before using reflection or similar?
Any ideas/etc appreciated.
Cheers,
Marcus
--
.....
,,$$$$$$$$$, Marcus Crafter
;$' '$$$$: Computer Systems Engineer
$: $$$$: ManageSoft Corporation
$ o_)$$$: Melbourne Australia
;$, _/\ &&:'
' /( &&&
\_&&&&'
&&&&.
&&&&&&&:
|
|
|
