java-programmer >>keystroke latency patterns

keystroke latency patterns

Index ‹ java-programmer

Previous
- 3
  - 2 nested result setOn 19 Gen, 03:41, Lew <email***@***.com> wrote:
    > > A ResultSet object is automatically closed when the Statement object that generated it
    > > is closed, re-executed, or used to retrieve the next result from a sequence of multiple results.
    
    I've resolve usig two different statement.
    Thank you so much (and to the java doc too :) )
- 3
  - Mixed SAX and DOM processing: echoing with occassional changes.I need to write a tool which will allow me to process a huge document
    with chunks of it in memory. The procedure is to echo XML coming from
    some input to an output, then when I hit a certain type of element,
    read all of its children into a DOM and somehow manipulate it
    (specifically, the goal is to hand it to a rules engine which will add
    flags). After that is complete, serialize it right back out to the
    stream and resume processing.
    
    My approach currently involves a ContentHandler object which simply
    serializes every event using a TransformerHandler object. When I see
    the element I want, I start creating Node objects in a stack and
    assembling them into a DOM as I hit closing elements. The problem is
    that there is no direct way of serializing that DOM to the same output
    stream without violating encapsulation. At first I thought that I
    would be able to pass the DOM to a SAX ContentHandler (which I would
    provide with a reference to the TransformerHandler doing the
    serialization). However, it turns out that isn't the case. I do not
    want to reinvent the wheel and walk the DOM manually nor do I want to
    create (potential) side-effects by writing directly to the OutputStream
    wrapped by my Result object using XMLSerializer on the DOM. XMLFilters
    do not appear to be a solution because I cannot apply my rules in a
    streamable fashion (and getting a DOM from the incoming stream is not
    the difficult part anyway).
    
    I've looked around and found a variety of mixed parsing techniques, but
    it seems that none of them quite meet my needs. Writing a class which
    takes a DOM, walks it, then calls the appropriate ContentHandler
    methods would not be too painful, but this seems horribly inelegant to
    me. Also, I cannot even begin to fathom that I am the only person who
    wants to do this.
    
    Any suggestions?
    
    (What follows is some code which may give an idea of where I am at.
    Simplified for brevity.)
    
    // Initial invocation
    final SAXParserFactory factory = SAXParserFactory.newInstance();
    factory.setNamespaceAware(true);
    final SAXParser parser = factory.newSAXParser();
    final XMLReader reader = parser.getXMLReader();
    final TransformerHandler handler = getTransformerHandler(System.out);
    reader.setContentHandler(new EvaluationHandler(handler));
    reader.parse("foo.xml");
    
    // EvaluationHandler (derives from a class which echoes to a provided
    ContentHandler)
    public void startElement(final String uri, final String localName,
    final String qName, final Attributes attributes) throws SAXException
    {
    if (performDOMProcessing())
    {
    final Element element = this.host.createElementNS(uri, qName);
    addAttributes(element, attributes);
    this.buffer.push(element);
    }
    else
    {
    super.startElement(uri, localName, qName, attributes);
    }
    }
    
    public void endElement(final String uri, final String localName, final
    String qName) throws SAXException
    {
    if (performDOMProcessing())
    {
    final Node element = this.buffer.pop();
    if (this.buffer.isEmpty())
    {
    if (this.host.hasChildNodes())
    {
    final Element root = this.host.getDocumentElement();
    this.host.removeChild(root);
    }
    this.host.appendChild(element);
    // Do processing against this.host with rules engine.
    // Pass off to serialization.
    }
    else
    {
    this.buffer.peek().appendChild(element);
    }
    }
    else
    {
    super.endElement(uri, localName, qName);
    }
    }
    
    public void characters(final char[] characters, final int start, final
    int length) throws SAXException
    {
    if (performDOMProcessing())
    {
    final String text = new String(characters, start, length);
    final Text textNode = this.host.createTextNode(text);
    this.buffer.peek().appendChild(textNode);
    }
    else
    {
    super.characters(characters, start, length);
    }
    }
- 3
  - ReportViewer.jarI need ReportViewer.jar file which is required to call Crystal Reports
    within Java. All other required .jar files, I have got.
    
    Please provide me this file at <email***@***.com>
    imediatly, if you have. I will be very thankfull to you.
    
    HERE IS CODE:-
    
    */
    
    import java.awt.*;
    import javax.swing.*;
    import com.crystaldecisions.ReportViewer.*;
    
    // Use these to talk to RAS
    import com.crystaldecisions.sdk.occa.report.application.*;
    import com.crystaldecisions.sdk.occa.report.reportsource.*;
    
    public class HelloWorldSwing
    {
    private static void createAndShowGUI()
    {
    try
    {
    //Make sure we have nice window decorations.
    JFrame.setDefaultLookAndFeelDecorated(false);
    
    //Create and set up the window.
    JFrame frame = new JFrame("HelloWorldSwing");
    frame.setTitle( "Testing 1, 2, 3");
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    
    ReportViewerBean viewer = new ReportViewerBean();
    viewer.init( new String[0], null, null, null);
    
    ReportClientDocument rpt = new ReportClientDocument();
    
    // FLui: set the RAS server if you are using RAS
    rpt.setReportAppServer( "localhost" );
    rpt.open( "ras://C:\\Reports\\MyReport.rpt", 0 );
    
    IReportSource rptSource = rpt.getReportSource();
    viewer.setReportSource( rptSource );
    
    frame.getContentPane().add( viewer, BorderLayout.CENTER );
    frame.setSize( 700, 500 );
    frame.setVisible(true);
    
    viewer.start();
    }
    catch ( Exception exception )
    {
    System.out.println( exception.toString() );
    }
    }
    
    public static void main(String[] args)
    {
    //Schedule a job for the event-dispatching thread:
    //creating and showing this application's GUI.
    //
    com.crystaldecisions.ReportViewer.ReportViewerFrame.main( args );
    javax.swing.SwingUtilities.invokeLater(new Runnable()
    {
    public void run()
    {
    createAndShowGUI();
    }
    });
    }
    }
- 3
  - exception in at javax.swing.SwingGraphics.createSwingGraphicsI am getting the following exception sometimes in my GUI. How can I
    debug this? There is nothing from my code in the stack and the
    exception is not easily reproducible. Any help will be greatly
    appreciated.
    
    java.lang.Exception: Stack trace
    at java.lang.Thread.dumpStack(Thread.java:1064)
    at
    javax.swing.SwingGraphics.createSwingGraphics(SwingGraphics.java:147)
    at javax.swing.JComponent._paintImmediately(JComponent.java:4670)
    at javax.swing.JComponent.paintImmediately(JComponent.java:4488)
    at
    javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:410)
    at
    javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilities.java:117)
    at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
    at
    java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
    at
    java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
    at
    java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
    at
    java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    java.lang.NullPointerException
    at javax.swing.JComponent._paintImmediately(JComponent.java:4671)
    at javax.swing.JComponent.paintImmediately(JComponent.java:4488)
    at
    javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:410)
    at
    javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilities.java:117)
    at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
    at
    java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
    at
    java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
    at
    java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
    at
    java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    In paintImmediately null graphics
- 4
  - Automated Basic Authenication with an Applet for the Browser ?I like to automate web access to secure pages and proxies, which are
    proteced with a Basic Authenication scheme.
    
    The Basic Authentication within an Applet works really well, I get all
    the information I need when I attach the
    
    Authorization: Basic base64encodeUID_PW to the request Header.
    or
    if I use the Authenticator Class of the JDK1.5.
    
    My problem is that the browser does not notice that I already have
    a UID/Password combination for the desired web page.
    
    When I did the same with a form based authorisation the URLConnection
    was setting the Cookie inside the browser implicitly, the
    showDocument() method displayed the secure page, because the browser
    used the cookie to access it.
    
    Is there any way to access the cache for the UID and Password of the
    browser to set these values that when I invoke the showDocument() to
    display the page inside the browser, I don't have to enter the UID and
    Password again?
    
    My current code to authenticate myself is this, I also tried a direct
    socket connection and a HttpURLConnection there was no difference:
    
    String urlString =
    "http://www.demo.com/basicprotectedpage/index.html"
    AppletContext appCont = getAppletContext();
    
    //created password authenticator.
    mmAuthenticator myPassAuth = new mmAuthenticator(uid,pw);
    //setting password.
    Authenticator.setDefault(myPassAuth);
    
    //URL created.
    URL url = new URL(urlString);
    //opening connection
    URLConnection conn = url.openConnection();
    
    //setting do input and do output.
    conn.setDoInput(true);
    conn.setDoOutput(true);
    conn.setUseCaches(true);
    
    //Data Input Stream
    
    BufferedReader bin = new BufferedReader(new
    InputStreamReader(conn.getInputStream()));
    String inputLine;
    System.out.println("web page data " );
    while ((inputLine = bin.readLine()) != null)
    
    System.out.println(inputLine);
    
    bin.close();
    
    appCont.showDocument(new URL(urlString)); // this should
    display the secure page without the prompt for uid password
    
    Thank you in advance. Have a nice day.
    
    FB
- 5
  - Crystal Report Change Data SourceI have a few crystal reports (XI) that uses JDBC to connect to MS SQL
    Server. The JDBC Driver is JTDS 1.1. Now I am trying to update the data
    source definition to include JNDI name so it can be more portable. The
    trouble is I can't update it.
    
    Here's what I've tried on existing working reports:
    
    - Go to "Set Datasource Location" dialog, expand current data source
    properties, add JNDI connection name. Crystal now pops up a dialog box,
    asking me to confirm connection info. So I put in user ID and Password.
    Clicking "Finish" and Crystal pops up a message saying "Logon failed.
    Details: SQL Exception: [SQL State:] 08501 [Error Message:] Network
    error IOException: Connection refused: connect". Then the same
    connection fonfirmation dialog come up again as if i typed in wrong
    user name and password.
    
    - The next thing I tried (since I can't manually add JNDI name) is to
    replace existing datasource with another one. Again, I go to "Set
    Datasource Location". I've already defined another JDBC connection with
    JNDI name in it. now selecting existing connection in the tree at the
    top and select the new connection in the tree at the bottom, click
    "Update". Now connection confirmation dialog pops up. After entering
    user id and password, I click Finish. Then Crystal says
    - "Data Object cannot be opened/accessed."
    - "Database Connector Error: 'Unexpected error'"
    - "Data Object cannot be opened/accessed."
    - "Database Connector Error: 'Unexpected error'"
    - "Some tables could not be replaced, as no match was found in the
    new data source. Please specify the table required for any unmodified
    tables."
    
    Some more information regarding existing reports. When I created the
    reports, Crystal complains about not able to find the tables and offer
    me to remove the related fields from the report. I clicked "No" and the
    reports still runs perfectly fine.
    
    There isn't much I can do after this. So I look up on the web, I think
    it may have to do with the not so well implemented "verify database"
    functionality, but I have no way to prove or solve it.
    
    Can anyone help me on this? The database is the same, so theoretically
    there shouldn't be any problem updating the datasource defintion,
    especially when the datasource is the same as before. And adding JNDI
    name to the report shouldn't be a problem either because it won't get
    use until a Java app try to run it.
    
    Any suggestions?
    
    Thanks,
    Jo
- 5
  - jxta in subnetHallo,
    
    i have a broblem with the jxta technology. I build up a testbed
    consisting of a server a router and two clients. The router is
    connected to the two clients and the server. Any connection from one
    client to another or from one client to the server goes through the
    router. Client 1 is configured with ip 192.168.100.1, client two with
    172.16.0.1 and the server with 10.0.0.2. So the router routes for
    three different subnets. No machine has access to the another (except
    the router). There is also no connection to the internet.I wrote an
    application built on jxta. The application runs on the server and the
    two clients. I configured the peers as rendevouzs and added to every
    peer the ip's of the two others to the list of known rendevouzs peers.
    When i run my application, the peers can find each other, BUT it needs
    a lot of time, somtimes about 10 miutes. I cannot understand this,
    because the peers know each other by the list of known rendevouzs. How
    can i improve the time the peers need to find each other? I think my
    configuration settup is ok (, otherwise the peers never would find
    each other?).
    Can anyone help me ?
    
    Michibeck.
- 6
  - Converting Unicode to ASCIIAny Java code examples for converting Unicode to ASCII?
    
    Many thanks.
- 7
  - Connection Pooling in Java application for interacting with Websphere MQI have following infrastruture at my site.
    
    1> Machine #1 has below
    - Websphere MQSeries 6.0 (client setup - Slim Client)
    - OS = Windows 2003
    - i/p address : 10.1.11.10
    - Tomcat web server 5.5
    - No Websphere Application Server.
    
    2> Machine #2 has below
    - Websphere MQSeries 6.0 (Server setup)
    - OS = Windows 2003
    - i/p address : 10.1.11.21
    - Queue Manager Name : qMngr
    - Queue Name (client will put the message) : toServerQ
    - Queue Name (client will get the message) : fromServerQ
    
    - I have developed the web application in Tomcat web server 5.5 using
    MQ base classes for accessing the Websphere MQ.
    - Since it is web application there can be atleast 25 request at
    time.
    i.e. when client#1 request data from queue he must get data related
    to client#1 only not other than client#1.
    - For accessing the websphere MQ, I am using websphere MQ base classes
    in Client mode. (Not JMS)
    
    ==>>>> Source Code as follows
    
    Class MQInterface (Servlet) is used for getting the web request from
    user and reply the response in html format.
    ------------------------------------------------------------------------------------------------------
    
    public class MQInterface extends HttpServlet {
    
    protected void doPost(HttpServletRequest request,
    HttpServletResponse response)
    throws ServletException, IOException {
    String Output = "";
    System.out.println("!! Entered into Banking Servlet !!");
    String requestParam = request.getParameter("OPRN_CODE");
    
    if (requestParam.equalsIgnoreCase("GET_NAME_DETAIL")){
    
    String id = request.getParameter("id");
    Output = MQDataObject().getNameDetail(id);
    
    return Output;
    }
    response.setContentType("text/html");
    PrintWriter out = response.getWriter();
    out.println(Output);
    }
    
    Class MQDataObject is used for getting and putting data(message) into
    Websphere MQ.
    ------------------------------------------------------------------------------------------------------
    
    public class MQDataObject {
    private String hostname = "10.1.11.21";
    private String channel = "Chnl1";
    private String qManager = "qMngr1";
    private MQQueueManager qMgr;
    private ISISSSLAdaptor ssl;
    private ISISConfigHelper ConfigHelper;
    private String Output;
    
    public MQDataObject(){
    MQEnvironment.hostname = hostname;
    MQEnvironment.channel = channel;
    
    MQEnvironment.properties.put(MQC.TRANSPORT_PROPERTY,MQC.TRANSPORT_MQSERIES_CLIENT);
    MQEnvironment.sslCipherSuite =
    "SSL_RER_WERH_3KIUD_EQW_CRT_SSA";
    
    try{
    ssl = new DEMOSSLAdaptor("DEMOSSLAdaptor.config");
    ConfigHelper = new
    ISISConfigHelper("MQConnection.config");
    }catch(Exception exception){
    System.out.println("Exception Details => " + exception);
    }
    }
    public String getNameDetail(String sendMessage){
    ....
    ....
    
    MQEnvironment.properties.put(MQC.TRANSPORT_PROPERTY,MQC.TRANSPORT_MQSERIES_CLIENT);
    
    String msgText = "";
    try
    {
    ....
    ....
    
    // Create a connection to the Queue Manager.
    qMgr = new MQQueueManager(qManager);
    
    // Set up the options on the queue we wish to open
    int openOutOptions = MQC.MQOO_OUTPUT;
    
    // Specify the queue to open and open option
    MQQueue sendingQueue =
    qMgr.accessQueue("toServerQ",openOutOptions,null,null,null);
    
    // Define the MQ message and write some text in UTF
    format
    MQMessage sendingMessage = new MQMessage();
    sendingMessage.writeUTF(sendMessage);
    
    // Specify the message options..
    MQPutMessageOptions pmo = new MQPutMessageOptions();
    
    // Put message on the queue
    sendingQueue.put(sendingMessage,pmo);
    
    // Close Sending Queue
    sendingQueue.close();
    
    // Receiving the message back
    
    // Wait for 5 seconds to get reply from receiving queue
    Thread.sleep(5000);
    
    // Set up the options on receiving queue we wish to open
    int openInOptions = MQC.MQOO_INPUT_AS_Q_DEF |
    MQC.MQOO_OUTPUT;
    MQQueue receivingQueue =
    qMgr.accessQueue("fromServerQ",openInOptions,null,null,null);
    
    MQMessage receivingMessage = new MQMessage();
    
    // Set and Get the message options
    MQGetMessageOptions gmo = new MQGetMessageOptions();
    
    // Receiving the message off the queue.
    receivingQueue.get(receivingMessage,gmo);
    
    // Get the message from the receiving queue.
    msgText =
    receivingMessage.readStringOfByteLength(receivingMessage.getMessageLength());
    
    // Close Receiving Queue
    receivingQueue.close();
    
    // Close a connection to the Queue Manager.
    qMgr.disconnect();
    
    // Parse the received message using parser.
    String output = new IFXXMLParser().runExample(msgText);
    
    }
    catch (MQException mqex){
    System.out.println("MQ Error : " + mqex);
    }
    catch (Exception ex){
    System.out.println("General Error : " + ex);
    }
    return Output;
    }
    }
    
    The message for sending the receiving is in XML format.
    
    Could any one help me following in questions.
    
    1> Since there is 30 request at time so for improve the performance
    and resources I need to do connection pooling.
    How can I achieve this using base classes.
    2> While retrieving (getting) the message for particular request how
    can I identify the response message.
    i.e. when client#1 request data from queue he must get data related
    to client#1 only not other than client#1.
    because In above scenario there are separate queues for getting the
    message and putting the message.
    
    I have read the tutorial on connection pulling but I am little
    confused.
    
    Thanking in Advance
    Sanjeev
- 8
  - Hot opportunities for Java Consultants in ClevelandHey All -
    
    I'm putting out an A.P.B. for Java Developers in the Cleveland area,
    or folks who are willing to work in Cleveland. Sun Certification is a
    huge plus, and consulting experience would make you a rock star.
    Contact me via e-mail with a resume if you're interested, and feel
    free to tell friends!
    
    Thanks,
    
    Jerome
- 8
  - A little optimization question: Local var allocationI often wonder: Does it make any difference in EXECUTION TIME which
    version I choose:
    
    #1:
    String st;
    while (true){
    st=dis.readLine();
    if (st==null) break;
    < do something else >
    }
    
    #2:
    while (true){
    String st=dis.readLine();
    if (st==null) break;
    < do something else >
    }
    
    It's obvious that st is valid outside the loop in #1. But does it get
    allocated on the stack for every iteration in #2, or just re-used? If
    not, I suppose #2 is preferred as far as limiting the scope, enabling
    gc, is an issue.
    
    Chris
- 8
  - Great Documentation for Investment and Trading SystemsJust wanted to let people know about a new, free Encyclopedia for Investors
    and Traders who are building or maintaining systems:
    
    Http://www.itsdoc.org
    
    "itsdoc" stands for "It's Documentation."
    
    The site attempts to provide highly accurate documentation in an
    encyclopedia format. It's 100% free, with no
    advertising whatsoever and no soliciting. The entity is entirely non-profit.
    
    Users are invited to contribute high quality material to the site and also
    draw
    from the considerable knowledge base hosted there. If you are coding
    investment
    and trading systems you will probably find this site extremely helpful.
    
    It's new, the official launch isn't until January so the site has a few
    rough
    edges right now. Still, its very useful.
    
    I hope you get a lot out of it. Please help promote it and put something
    back into it too.
    
    Rick
- 10
  - JTextArea append method doesn't always appendI have an application with many custom loggers, and a number of JTextArea
    instances for displaying the log entries written to the loggers. Each
    JTextArea has a thread associated with it that continuously pulls entries
    out of a particular logger and appends that text to the JTextArea. Thus,
    each entry written to a logger should show up in the associated JTextArea.
    
    The problem I have is that not all the log entries show up in the text area,
    and what shows up and what does not can change with each execution. I've
    put print statements before and after the log statements, and before and
    after the text area append, and all the expected log entries show up at all
    those places. Only in the JTextArea is there variability in what shows up.
    Is this a bug in JTextArea, or is this some known behavior?
    
    --
    =================
    Lee Graba
    email***@***.com
    =================
- 11
  - MacOS X (was javax.usb)Steve W. Jackson wrote:
    
    >>http://en.wikipedia.org/wiki/Macos#Mac_OS_X
    >>
    >>Mac OS X brought Unix-style memory management and pre-emptive
    >>multitasking to the Mac platform. It is based on the Mach kernel and the
    >>BSD implementation of UNIX, which were incorporated into NeXTSTEP, the
    >>object-oriented operating system developed by Steve Jobs's NeXT company.
    >>
    >>Cheers,
    >
    >
    > That's an interesting read, but it should not be taken as any form of
    > "gospel" since it contains some inaccuracies of its own.
    
    It's easily fixable, should you be so inclined. What's wrong with it
    though - it's what I've read in the past, that MacOS X is the Mach
    microkernel (tightly) wed to bits and pieces of a BSD (I'm not sure
    which, I think FreeBSD or NetBSD).
    
    --
    David N. Welton
    - http://www.dedasys.com/davidw/
    
    Linux, Open Source Consulting
    - http://www.dedasys.com/
- 12
  - Struts Readonly...Hi,
    
    can anybody tell me, if it's possible to set sturts fields in an jsp
    site to readonly via an action?
    Hope it is understandable what I want, my englisch isn't the best...
    
    Greetings
    Laverna

Author

Message

seiferc

Posted: 2003-11-12 3:49:00

Top

java-programmer, keystroke latency patterns Hi,
my name is Christian Seifert and I am graduate student as Seattle
University currently researching Keystroke Latency Patterns.

I would like to invite you to participate in the project by providing
me with your own keystroke latency patterns. I have created a data
collections java applet which can be accessed through the project site
at http://students.seattleu.edu/seiferc/independentStudies/index.asp.
Participating will not take longer than 5 minutes.

I have posted a message about a week ago and I would like to thank all
those who have participated. I am posting this again, because I need
much more data to create a valid algorithm.

Thanks for participating,

Christian Seifert

Index ‹ java-programmer

Next
- 1
  - Newbie question - Development environment (IDE)Hi folks,
    
    I am new to java. I am thinking of switching to java because of
    multiplatform support and I am currently on Windows with VB. I also did some
    Javascripting within some ASP pages and I have rusty memories about Pascal
    and C++ from my MS DOS times. But in the last years I focused on VB. So far
    the introduction.
    
    I am a little confused about what is the difference between Java and J2EE,
    JSP, JavaBeans, JavaApplets, Servelets and some other keywords that you face
    when looking around about Java. However, I would need Java for Client
    applications, server side services for scripting and web applications. As I
    am not satisfied with the evolution of the .NET (apart that it keeps me
    dependent on Microsoft Windows platform) I guess I am better with Java,
    correct?
    
    I have seen some development environments (IDE) yet (like NetBeans and
    Eclipse), but talking with other guys I always hear new names so I decided
    to ask here at the newsgroup what would be the best thing to use. I am sure
    that it depends even on personal preferences but I would really be glad to
    hear/read your opinions. It would be a good orientation for me. So please
    tell me, what you prefer and why?
    
    Thanks a lot in advantage for all who give an idea,
    
    Martin.
    
    mailto:email***@***.com
    http://www.may.co.at
- 2
  - please refer me some good java consultanthi,
    
    I have a very good oppertunity in louisville,KY for Java developer
    And also i have fulltime position in louisville,KY for Java Developer.
    
    please refer me some references who have very good in Java,
    J2ee,Struts,
    
    Location: Louisville,KY
    Duration : 3 to 6 months go longer
- 3
  - Teach online turn your wisdom into wealth at GoogleSpammer.comOn Sep 30, 10:27 am, email***@***.com wrote:
    > Every one ..
    
    ..has realised that most of the spam on the internet
    originates from Google Groups. So apparently some
    'smart' Google spammers are trying to obscure their
    origins by showing a public address of yahoo* or
    hotmail*.
    
    It won't work though, since listed clearly in the
    headers of the post is..
    "X-Trace: posting.google.com 1191112075
    31470 127.0.0.1 (30 Sep 2007 00:27:55 GMT)"
    
    * Yes, and they are, in order, probably the next
    biggest sources of spam.
    
    Andrew T.
- 4
  - Creating session state without http or ejbHi all,
    
    I want to duplicate a feature I used in an ejb-based web service, in an
    non-ejb tomcat-based web service. I want to allow a user to login via a
    web service, on successful authentication return a session id String,
    and on future call pass in the session id:
    
    public ReturnWeb_Login web_Login(
    String user_name,
    String user_password) throws RemoteException {
    
    soap_session_id = serviceLocator.getSoapSession_Id(soapSession);
    if (athenticate(user_name,user_password)) {
    return new ReturnWeb_Login (soap_session_id, user_name);
    }
    }
    
    The idea here is that soap_session_id is generated from a Stateful
    Session bean, and times out. Once logged in, subsequent calls are like:
    
    public ReturnWeb_Base doSomething(
    String soap_session_id) throws RemoteException {
    
    //check authorization
    SoapSession soapSession = checkAuthorization(soap_session_id);
    if(soapSession!=null) {
    //do something
    }
    }
    
    The above works without messing around with the internal servlet the
    web service uses, axis in this case.
    
    My question is simple, though the answer may be difficult: How can I
    create a session id that times out, independent of http or ejb ?
    
    iksrazal
- 5
  - JNLP file download errorHi,
    
    I want to run a jnlp file. But it gives me an error like this "Unsigned
    application requesting unrestricted access to system". Can I solve this
    problem ?
    
    Thanks you.
- 6
  - How do you write a program that prints 20 random cards?I have to write a program that prints 20 random cards (suit,
    faceValue). I have to have a driver program and write a constructor
    with my own methods. I am fairly new at java, and this concept is
    confusing to me at the moment. So far, I have written both the driver
    and constructor programs. However, they do not work. It compiles and
    runs, but every card says "Spade null". I think it has something to
    do with my random number generator. Please help. Here's my driver
    program:
    
    ***********************************************************
    import java.util.Random;
    
    class CardGenerator
    {
    public static void main (String [] args)
    {
    // Use to get random numbers
    Random generator = new Random();
    
    // Print out to screen
    System.out.println ("Dealing 20 random cards: ");
    
    // repeat this loop 20 times to get 20 cards
    for (int i=1; i<=20; i++)
    {
    // declare new object
    Card myCard = new Card (1,1);
    
    // get random numbers for suit and faceValue
    int suit = generator.nextInt(4) +1;
    int faceValue = generator.nextInt(13) +1;
    
    // get number from my methods
    suit = myCard.getSuit();
    faceValue = myCard.getFaceValue();
    
    // print card
    System.out.println (myCard);
    }
    }
    }
    
    ************************************************************
    Here's the program with the constructor and my methods:
    ************************************************************
    
    // import classes
    import java.util.Random;
    
    class Card
    {
    
    // declare variables
    private int suit;
    private int faceValue;
    String cardType;
    String suitType;
    
    // constructor
    public Card (int suit, int faceValue)
    {
    // call methods
    getSuit();
    getFaceValue();
    }
    
    // gets value for suit
    public int getSuit()
    {
    return suit;
    }
    
    // gets value for faceValue
    public int getFaceValue()
    {
    return faceValue;
    }
    
    // decides the suit and card according to the random number
    picked
    public String toString()
    {
    // if statements to get suit type
    if (suit == 1)
    suitType = "Heart";
    else if (suit == 2)
    suitType = "Diamond";
    else if (suit == 3)
    suitType = "Club";
    else
    suitType = "Spade";
    
    // switch statement to get card type
    switch (faceValue)
    {
    case 1:
    cardType = "Ace";
    break;
    
    case 2:
    cardType = "2";
    break;
    
    case 3:
    cardType = "3";
    break;
    
    case 4:
    cardType = "4";
    break;
    
    case 5:
    cardType = "5";
    break;
    
    case 6:
    cardType = "6";
    break;
    
    case 7:
    cardType = "7";
    break;
    
    case 8:
    cardType = "8";
    break;
    
    case 9:
    cardType = "9";
    break;
    
    case 10:
    cardType = "10";
    break;
    
    case 11:
    cardType = "Jack";
    break;
    
    case 12:
    cardType = "Queen";
    break;
    
    case 13:
    cardType = "King";
    break;
    
    }
    
    // returns string
    return (suitType + "\t" + cardType);
    
    }
    }
    ******************************************************
    If someone could help me, please do. Because I am stuck and lost
    right now. Thanks.
    
    David
- 7
  - Problems with SOAP...Hello everybody,
    
    I want to have a program that do something like that:
    1. A client sends a SOAP message to a servlet.
    2. The servlet receives this message and gives it to a server (which is
    installed on the same PC than the Tomcat server).
    3. The server sends back the response to the servlet as a SOAP message.
    4. The client receives the response from the servlet.
    
    The communication between my client and my servlet is ok and works fine.
    My problem is for the second step. I don't know exactly what kind of
    mechanism I have to use to send from my servlet a SOAP message to a
    local application (using the port 12345 for example) and get a SOAP
    response. I also don't know how the code must looks like on the server
    side in order to receive a SOAP message from the servlet (and send the
    response).
    
    Any help welcome! Thanks in advance.
    
    Romain.
- 8
  - HOW to remove noise from recorded fileI am using java.sound.sampled api to record and plyback soound but the
    recording quality is not good. A continuous hiss sound is there.
    plz help me finding out that
- 9
  - Signed applet problem with plugin 1.4.2Hi Java gurus,
    
    I have an applet signed in JDK 1.4 jarsiner and using a Verisign code
    signing key. It works nicely in Netscape & IE.
    
    My troubles began when Sun upgraded to plugin 1.4.2_01-b06. When using
    this plugin with IE, the applet still shows the "trust applet?" popup,
    but when I click OK, an exception occurs as soon as the applet reaches
    a privileged operation like system.getProperties(). I get
    "SecurityControlException: access denied". This occurs in IE 5 and IE
    6, on any platform I tested: XP, Win2000, Win98 etc. The applet still
    works file on Netscape.
    
    I also tried to sign the applet with JRE 1.4.2, but still IE denies
    it.
    
    Any clue?
    
    Thanks in advance
    
    Sruli Ganor
- 10
  - **I NEED A JSF, SPRING, HIBERNATE PERSON!!***If anyone knows anyone looking for some full time work or a contracting
    position in Santa Monica CA, please contact me!!
    
    email***@***.com
    310 998 9442
    
    JSF, JAVA SERVER FACES, JSP, SPRING, HIBERATE, STRUTS!!!
- 11
  - How to accept the Untrusted cert?Dear All,
    
    I use JSSE to implement a proxy server which support http/https.
    However, I find my code can't support some secure site which provide a
    certificate which doesn't signed by CA.
    
    and here is the error message:
    javax.net.ssl.SSLHandshakeException:
    sun.security.validator.ValidatorException: No trusted certificate
    found
    at com.sun.net.ssl.internal.ssl.BaseSSLSocketImpl.a(DashoA12275)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
    at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA12275)
    at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA12275)
    at com.sun.net.ssl.internal.ssl.SunJSSE_ax.a(DashoA12275)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.j(DashoA12275)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(DashoA12275)
    at Proxy.SSLNegotiation.startNegotiation(SSLNegotiation.java:101)
    at Proxy.SSLProxyProcess.makeNegotiation(SSLProxyProcess.java:383)
    at Proxy.SSLProxyProcess.run(SSLProxyProcess.java:83)
    at Proxy.ProxyProcess.run(ProxyProcess.java:107)
    Caused by: sun.security.validator.ValidatorException: No trusted
    certificate found
    at sun.security.validator.SimpleValidator.buildTrustedChain(SimpleValidator.java:304)
    at sun.security.validator.SimpleValidator.engineValidate(SimpleValidator.java:107)
    at sun.security.validator.Validator.validate(Validator.java:202)
    at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(DashoA12275)
    at com.sun.net.ssl.internal.ssl.JsseX509TrustManager.checkServerTrusted(DashoA12275)
    ... 10 more
    java.net.SocketException: Socket is closed
    at java.net.Socket.setSoTimeout(Socket.java:920)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.setSoTimeout(DashoA12275)
    at Proxy.HttpResp.<init>(HttpResp.java:53)
    at Proxy.SSLProxyProcess.makeNegotiation(SSLProxyProcess.java:385)
    at Proxy.SSLProxyProcess.run(SSLProxyProcess.java:83)
    at Proxy.ProxyProcess.run(ProxyProcess.java:107)
    
    what should i do to accept the self-sign certificate?
    
    Thank,
    Jake
    
    Here is my code.
    
    package Proxy;
    import java.io.IOException;
    import java.net.Socket;
    import java.net.UnknownHostException;
    import java.security.KeyStore;
    
    import javax.net.ssl.KeyManagerFactory;
    import javax.net.ssl.SSLContext;
    import javax.net.ssl.SSLSocket;
    import javax.net.ssl.SSLSocketFactory;
    import javax.net.ssl.TrustManagerFactory;
    
    public class SSLNegotiation {
    private Socket socket = null;
    private String host = null;
    private int port;
    private String keyStore = null;
    private char keyStorePass[] = null;
    private char keyPassword[] = null;
    private String sslContextInst = null;
    private String keyStoreInst = null;
    private String keyManagerFactoryInst = null;
    private String trustManagerFactoryInst = null;
    
    public SSLNegotiation(Socket socket) {
    this.socket = socket;
    host = socket.getInetAddress().getHostName();
    port = socket.getPort();
    }
    
    public SSLNegotiation(String host, int port) {
    this.host = host;
    this.port = port;
    }
    
    public SSLNegotiation(Socket socket, String host, int port) {
    this.socket = socket;
    this.host = host;
    this.port = port;
    }
    
    public void importKeyStore(String ks, String ksp) {
    importKeyStore(ks, ksp, ksp);
    }
    
    public void importKeyStore(String ks, String ksp, String kp) {
    keyStore = ks;
    keyStorePass = ksp.toCharArray();
    keyPassword = kp.toCharArray();
    }
    
    public void setInstance(String content, String ks, String kmf, String
    tmf) {
    sslContextInst = content;
    keyStoreInst = ks;
    keyManagerFactoryInst = kmf;
    trustManagerFactoryInst = tmf;
    }
    
    public Socket startNegotiation(boolean connectServer) {
    KeyStore ks = null;
    KeyManagerFactory kmf = null;
    SSLContext sslContext = null;
    SSLSocket sslSocket = null;
    
    try {
    ks = KeyStore.getInstance(keyStoreInst);
    ks.load(this.getClass().getResourceAsStream(keyStore),
    keyStorePass);
    kmf = KeyManagerFactory.getInstance(keyManagerFactoryInst);
    kmf.init(ks, keyPassword);
    sslContext = SSLContext.getInstance(sslContextInst);
    if (trustManagerFactoryInst == null)
    sslContext.init(kmf.getKeyManagers(), null, null);
    else {
    TrustManagerFactory tmf =
    TrustManagerFactory.getInstance(trustManagerFactoryInst);
    tmf.init(ks);
    sslContext.init(kmf.getKeyManagers(),
    tmf.getTrustManagers(),
    new java.security.SecureRandom());
    }
    
    SSLSocketFactory factory = sslContext.getSocketFactory();
    
    if (socket != null)
    sslSocket = (SSLSocket) factory.createSocket(socket, host, port,
    false);
    else
    sslSocket = (SSLSocket) factory.createSocket(host, port);
    
    sslSocket.setUseClientMode(connectServer);
    sslSocket.setEnabledCipherSuites(sslSocket.getSupportedCipherSuites());
    if (connectServer)
    sslSocket.startHandshake();
    
    } catch (UnknownHostException uhe) {
    uhe.printStackTrace();
    } catch (IOException ioe) {
    ioe.printStackTrace();
    } catch (Exception e) {
    e.printStackTrace();
    } finally {
    return sslSocket;
    }
    }
    }
- 12
  - XMLSchema, validationhelp please. The code below throws this:
    
    java.lang.UnsupportedOperationException: This parser
    does not support specification "null" version "null"
    
    in code:
    
    DocumentBuilderFactory dbfactory = DocumentBuilderFactory.newInstance();
    SchemaFactory factory =
    SchemaFactory.newInstance(XMLConstants.W3C_XML_SCHEMA_NS_URI);
    Source schemaFile = new StreamSource(new File("filename.xsd"));
    Schema schema = factory.newSchema(schemaFile);
    dbfactory.setSchema(schema); <--here the exception is thrown
    dbfactory.setNamespaceAware(true);
    DocumentBuilder parser = dbfactory.newDocumentBuilder();
    parser.setErrorHandler(new ConfigurationFileErrorHandler());
    doc = parser.parse(is);
    
    filename.xsd looks like this:
    
    <?xml version="1.0" encoding="UTF-8"?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/
    XMLSchema"
    targetNamespace="http://ernie.icslab.agh.edu.pl/
    wielgus/chameleon/Operation"
    xmlns="http://ernie.icslab.agh.edu.pl/wielgus/
    chameleon/Operation">
    <xsd:element name="chameleonoperation"
    type="ChameleonOperation"/>
    <xsd:complexType name="ChameleonOperation"/>
    </xsd:schema>
    
    I would like to know why is this happening. Not really interested in how
    to fix this, but mainly why. This code used to work some time ago, and i
    don't know what has changed that it is no longer working.
    
    SaSol
- 13
  - Sending text read from GUI to a methodHey,
    
    Have a problem sending a String from a GUI to a method.
    
    The method definitely works as I can use with text that I set in code.
    
    track.deleteFromList("some object name"); // removes object called
    "some object name" from the list that the track object stores.
    
    When I try to use a text box to read in the text it doesn't work.
    
    The String is read in correctly, checked.
    
    The String is read by method correctly, checked.
    
    It should then make a comparison with each place in the list to see if
    it's the correct identifier (Strnig is identifier/name of the object to
    be deleted) but doesn't seem to realise when there is a match and
    therefore should execute remove form list.
    
    I suspect that the String has to be declared in some special way before
    it is passed to the method? as it is not of definite value when the
    prog starts running. It's read and fed properly, but because it's
    dynamic it's not being compared correctly?
    
    Relevant code is below, thanks very much for your help.
    
    t1: text box, b1: button
    
    FROM MAIN, everything else works, track is instance of Tracker2 class
    ///////////////////////////////////////////////////////////////////////
    b2.addSelectionListener(new SelectionAdapter(){
    public void widgetSelected(SelectionEvent e) {
    
    String inny = t1.getText();
    
    track.deleteFromList(inny);
    
    }
    });
    ///////////////////////////////////////////////////////////////////////
    
    import java.util.*;
    
    public class Tracker2 {
    
    private List<Array_test> list_of_test_objects;
    
    //construct
    public Tracker2(){
    list_of_test_objects = new ArrayList<Array_test>();
    }
    .......
    ......
    ......
    ......
    
    // delete from list given a certain identifier
    public void deleteFromList(String old_array_test_object) {
    int i = 0;
    while (i < list_of_test_objects.size()) {
    if ((list_of_test_objects.get(i).getIdentifier()) ==
    old_array_test_object) {
    list_of_test_objects.remove(i);
    i = list_of_test_objects.size();
    }
    i++;
    }
    }
    
    ......
    ......
    ......
    ......
- 14
  - CLDC help.....can ne1 plzzzzz tell me how can we access a cellphones iternal memory
    usind cldc configuration. i know the specification says that accessing
    that memory is prohibited but still there must be a method as mobile
    viruses must be using such techniques.........
- 15
  - JFrame start bar iconIs it possible to create a Frame or JFrame without the start bar icon?
    If so, could someone please tell me the trick?
    
    Thanks,
    
    Tim