java-programmer >>ports/71078: Update port: java/eclipse-pmd upgrade to support

ports/71078: Update port: java/eclipse-pmd upgrade to support

Index ‹ java-programmer

Previous
- 4
 - JavaHelp and root nodehi,
 Simplifying i have a java help set as this
 
 ROOT -> C
 -> B -> b1
 -> b2
 -> b3
 ->C
 
 I can set B as current visualized node with these instructions:
 helpBroker =(DefaultHelpBroker)coreHelpSet.createHelpBroker();
 helpBroker.setCurrentID(B);
 
 my problem is that i'd like to hide the other nodes setting B as tree
 root node so that i could only see B and its children b1,b2,b3.
 This is because entire help set is recovered from a big manual
 describing a lot of applications and i'd like to show only one referred
 by node B avoiding to show others that couldn't be installed.
 Can you help me?
 thanks
- 6
 - Read contents of a web pageI need to read the entire contents of any webpage, and return it as a
 String. The other part of my assignment was to read a file and return its
 contents. I did that with the following code:
 
 private String filename;
 private String contents;
 public TextFileReader(String aFileName){
 
 filename = aFileName;
 
 }
 
 public String readText() throws IOException{
 
 String lineSep = System.getProperty("line.separator");
 BufferedReader input = new BufferedReader(new
 FileReader(filename));
 String nextLine = " ";
 StringBuffer contents = new StringBuffer();
 
 while((nextLine = input.readLine()) != null){
 contents.append(nextLine);
 contents.append(lineSep);
 }
 
 return contents.toString();
 
 }
 
 ----------
 
 So, what do I have to change to be able to read webpages?
- 6
 - Riddle me thisOn Mon, 07 Nov 2005 11:35:27 GMT, "Sharp Tool"
 <email***@***.com> wrote, quoted or indirectly quoted someone
 who said :
 
 >All these distribution dont include negative numbers?
 
 A normal is clustered about a mean, nominally 0, with symmetric tails
 left and right.
 
 Poisson is a distribution of positive numbers.
 
 Just what do these numbers measure?
 --
 Canadian Mind Products, Roedy Green.
 http://mindprod.com Java custom programming, consulting and coaching.
- 9
 - how to set row height at runtime in a JTableHi
 
 i am trying to set rowheight of row in a JTable using
 setRowHeight(row,rowheight)
 
 it is not affecting on Table.but if i use setRowheight(rowheight) it
 applying
 
 entire table ,please help me to solve this problem
 
 after setRowHeight(row,rowheight), i am calling firechanged() method
 also ,i t will not affecting please hemp me
- 9
 - Reflection and access to type parameter?Given the SSCCE below, the need to pass A.class and B.class in
 lines 25 and 25 seems redundant. However, I can find nothing in
 the language that would let that be done in the constructor,
 between lines 18 and 19. The obvious would be
 
 Class<T> x = T.class;
 
 but that of course does not work. Is there any bridge at all
 between reflection and generics? I suspect the answer is no
 and the code below is the best that can be done, but I'm
 not sure.
 
 1 import java.lang.reflect.Method;
 2 public class TestEnums
 3 {
 4 public static enum A
 5 {
 6 V1,
 7 V2;
 8 }
 9 public static enum B
 10 {
 11 X1,
 12 X2,
 13 X3;
 14 }
 15 public static class C<T extends Enum<?>>
 16 {
 17 public C(Class<T> x) throws Exception
 18 {
 19 T[] eVal = x.getEnumConstants();
 20 for (Enum<?> v : eVal) System.out.println(v.toString());
 21 }
 22 }
 23 public static void main(String[] args) throws Exception
 24 {
 25 C<A> ca = new C<A>(A.class);
 26 C cb = new C(B.class);
 27 }
 28 }
- 11
 - jbuilder 2005 backward compatabilityHi
 I have a project that created by jbuilder X, in the "design" panel,
 everything work great, but when i use jbuilder 2005 to open it, it
 only display gray. Do you know why?
 
 thanks
 from Peter (email***@***.com)
- 11
 - ?s about Process ClassI have a DOS program I am trying to supply input to using Java.
 Reading from The Java Class Libraries, 2nd Ed. java.lang.Process class -
 the material presented seems to imply that I will be able to do
 this.
 
 The program most definately uses just stdio... (in) being the keyboard and
 (out) being the consol.
 
 Well I can't get it to work and being the presistant bugger that i am I have
 switch tactics so I can more up the learning curve.
 I have resorted to just trying to display the output of mem.exe.
 
 here is the source ::: test.java
 
 import java.io.*;
 import java.lang.*;
 
 public class test
 { public static void main(String[] args)
 {
 int ch;
 int status;
 
 try
 {
 Process process = Runtime.getRuntime().exec("mem.exe");
 InputStream in = process.getInputStream();
 BufferedInputStream buf = new BufferedInputStream(in);
 
 //try
 //{
 //status = process.waitFor();
 //}
 //catch (InterruptedException e) {status = -1;}
 
 try
 {
 while((ch = buf.read()) != -1)
 {
 System.out.print((char)ch);
 }
 
 }
 catch (IOException e) {System.out.println(e);}
 //in.close();
 //buf.close();
 //process.destroy();
 //Runtime.getRuntime().gc();
 //Runtime.getRuntime().exit(-1);
 //System.out.print('\n');
 }
 catch (IOException e) {System.out.println(e);}
 }
 }
 
 It works the first time I run the class file with java test.
 However, the next attempt hangs and requires a system restart inorder to get
 the code to display the results.
 
 The commented code in test.java are my attempts to do various things to
 clean up this issue of not displaying the results.
 
 Does anyone have a clue or suggestion...
 
 thanks,
 publius36
- 12
 - detecting which jvm version is being ran?Say I have an applet and would like to display which version of the JVM
 is being used from the applet. Any ideas as to how to do this?
- 13
 - how to mail a form in JSPhi this is ravin. i m a last year IT student and i am doing my project
 at a govt. organization. i have to do one thing in my project that:
 > there is a feedback form which is to be filled by any user.
 > it is having four fields.
 1) name
 2) tel.no
 3) e-mail address
 4) comments
 > i simply have to mail this fields to the org.'s mail address when user hits submit button. there is nothing to do with this fields.
 
 please send releated help as early as possible.
- 13
 - JacOrb Multihomed serverHi everybody,
 
 we have problems running a corba-server on a multi-homed Win2k-Box.
 The machine has two network-cards. JacOrb is using the wrong IPAddress
 for IOR's.
 I tried the property OAIAddr. Only setting the property to 127.0.0.1
 and running server and client on the same machine was successful.
 Using the real address failed.
 
 Does anyone have an advise for me ?
 
 Thanks in advance
 Ruediger
- 13
 - EMPTY_SET.iterator() and generics
 In the old days, before generics, I wrote
 
 private SortedSet onhand;
 
 Iterator getInventoryIterator() {
 return (onhand == null ? Collections.EMPTY_SET ? onhand)
 .iterator();
 }
 
 ... the idea being to create the SortedSet only if there are
 actually some Inventory objects to store in it, and to return
 a suitable Iterator whether or not the SortedSet exists.
 
 Now, in an effort to leave prehistory behind me and adopt
 generics with all their benefits, I change the SortedSet to a
 SortedSet<Inventory> and change the return type of the method
 to Iterator<Inventory> -- but how do I rewrite the guts of the
 method to get the compiler to understand that all is well? The
 problem seems to be that Collections.EMPTY_SET.iterator() returns
 an Iterator<Object>, and the compiler complains when I try to
 return this in place of the desired Iterator<Inventory>. I've
 tried a few variations, but have only succeeded in moving the
 warning message around, not in eliminating it:
 
 return (onhand == null
 ? (Set<Inventory>)Collections.EMPTY_SET : onhand)
 .iterator();
 
 return (Iterator<Inventory>)
 (onhand == null ? Collections.EMPTY_SET ? onhand)
 .iterator();
 
 This seems like a lot of trouble to take over the empty set,
 but there ought to be *some* clean way to do it. Ideas?
 
 --
 Eric Sosman
 email***@***.com
- 13
 - Hiding default console in Windows Hello. Is it possible to hide the default console window in MS-Windows
 in Java? If so, how?
 
 When writing a Swing/JFC application in Java, it would be really nice to
 somehow hide the DOS window that appears.
 
 Thanks in advance.
 
 --
 Randolf Richardson - kingpin+email***@***.com
 The Lumber Cartel, local 42 (Canadian branch)
 http://www.lumbercartel.ca/
- 14
 - GUI program locking up...I'm using Netbeans 5.0 beta for an IDE, with swing components. The
 situation is something like this:
 
 The program is a board game - the user chooses a building from a panel,
 and then is supposed to get a message to choose what resource to pay
 for it with. Here's a trace of the code:
 
 Game (main object):
 ....
 board[i].activate():
 Game.game.setPlayer(worker);
 Game.game.playerMessage("Choose a wooden building
 from the building panel.");
 Game.game.waitForBuild(type) :
 built = false;
 state = type + Game.BuildWood -
 1;
 
 mainPanel.buildings.getBP().setSelectedIndex(type-1);
 while(!built)
 { Thread.yield(); }
 No problems yet. This works fine, unless a building that needs to call
 chooseResource is selected.
 So, the user clicks one of these buildings, which activates the
 following code, which is where the freeze occurs:
 
 String r = Game.game.chooseResource():
 state = Game.chooseResource;
 resource = "";
 while(resource.length()==0)
 Thread.yield();
 return resource;
 
 Now chooseResource does work in any other context - resource gets set
 by a mouseClicked event handler in a panel out there. But at this
 point, the GUI stops responding. The playerMessage never gets printed,
 and the click event never gets triggered. I did some investigating,
 printing out numbers inside the two inmost loops, and the
 chooseResource loop is continually running. I know the code's ugly,
 but even so, the cause of this behavior is beyond me. Any suggestions
 would be greatly appreciated!
- 14
 - Asking help for a java io problemHello, guys! I have a problem running the following code with eclipse
 showing that:
 
 java.io.IOException: Stream closed
 at sun.nio.cs.StreamDecoder.ensureOpen(Unknown Source)
 at sun.nio.cs.StreamDecoder.read(Unknown Source)
 at java.io.InputStreamReader.read(Unknown Source)
 at HtmlFileParser.parseHtmlDoc(HtmlFileParser.java:32)
 at HtmlFileParser.main(HtmlFileParser.java:52)
 
 //code here:
 try{
 FileInputStream fin = new FileInputStream("test.html");
 InputStreamReader fr = new InputStreamReader(fin);
 for(i=0; i<2048; i++) buf[i] = '0';
 fr.read(buf, 0, 2048); //problem here (line 32)
 FileWriter fw = new FileWriter("bufWriteTest.txt");
 fw.write(buf);
 fw.flush();
 }
 catch(FileNotFoundException e) {
 e.printStackTrace();
 }
 catch(IOException e) {
 e.printStackTrace();
 }
 There are no syntax erro in the above code, it just dosen't work,
 please help me finding out what the problem is, thank you.
- 15
 - Problem in connecting to a proxyHi,
 i need to see if a user enters the correct username/password to
 authenticate to a proxy. My problem is... through the following code,
 i am
 able to connect to a proxy with even invalid username/passwords.
 Suppose
 if the valid username and password to a proxy is test/test , i am able
 to connect to the proxy using x/x . the response code returned is
 always 200. Please advice..
 
 ################################
 
 public static boolean isValidProxyAccount(String proxyServer,String
 proxyPort,String proxyLogin,String proxyPassword) throws IOException
 {
 String go_url = new String ("http://www.google.com/");
 boolean VALID_STATUS = true;
 
 try{
 URL url = new URL(go_url);
 
 System.getProperties().put("proxySet",
 "true");
 System.getProperties().put("http.proxyHost", proxyServer);
 System.getProperties().put("http.proxyPort", proxyPort);
 
 HttpURLConnection con = (HttpURLConnection)
 url.openConnection();
 Base64Encoder b1 = new
 Base64Encoder(proxyLogin+":"+proxyPassword);
 con.setAllowUserInteraction(true);
 String enStrProxy = "Basic "+ b1.processString();
 con.setRequestProperty("Proxy-Authorization", enStrProxy);
 
 int code = con.getResponseCode();
 String retMsg = con.getResponseMessage();
 
 System.out.println("code::"+code);
 System.out.println("retMsg::"+retMsg);
 
 System.getProperties().put("proxySet", "false");
 System.getProperties().remove("http.proxyHost");
 System.getProperties().remove("http.proxyPort");
 
 con.disconnect();
 
 if (code != 200){
 VALID_STATUS = false;
 throw new IOException("Failed to connect to CCO: "+retMsg);
 }
 }catch (Exception ex){
 System.out.println(ex.getMessage());
 throw new IOException(ex.getMessage());
 }//catch
 return VALID_STATUS;
 }

Author

Message

linimon

Posted: 2004-9-3 7:19:00

Top

java-programmer, ports/71078: Update port: java/eclipse-pmd upgrade to support Synopsis: Update port: java/eclipse-pmd upgrade to support eclipse3

State-Changed-From-To: open->feedback
State-Changed-By: linimon
State-Changed-When: Thu Sep 2 23:17:52 GMT 2004
State-Changed-Why:
Please submit port updates in diff -u format as versus the current
port. This makes it much easier for ports committers to understand
what is being changed. Thanks.

http://www.freebsd.org/cgi/query-pr.cgi?pr=71078
_______________________________________________
email***@***.com mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-java
To unsubscribe, send any mail to "email***@***.com"

nork

Posted: 2004-9-4 4:30:00

Top

java-programmer >> ports/71078: Update port: java/eclipse-pmd upgrade to support Synopsis: Update port: java/eclipse-pmd upgrade to support eclipse3

State-Changed-From-To: feedback->closed
State-Changed-By: nork
State-Changed-When: Fri Sep 3 20:29:40 GMT 2004
State-Changed-Why:
Committed, thanks!

http://www.freebsd.org/cgi/query-pr.cgi?pr=71078
_______________________________________________
email***@***.com mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-java
To unsubscribe, send any mail to "email***@***.com"

Index ‹ java-programmer

Next
- 1
 - Column numbers is stack trace - enhancement requestI filed the following enhancement request to Sun. Would like to hear
 opinion about how useful implementing this feature would be.
 
 Synopsis: Need column numbers in stack traces
 Description:
 A DESCRIPTION OF THE REQUEST :
 Stack traces contain only line numbers and in certain cases line number
 alone is not sufficient for figuring out where exactly an exception
 occurred. Consider the following line of code.
 
 value = getItem().getRelatedItem().getName().getValue();
 
 If the above line throws a NullPointerException, we have no clue
 whether it is the getItem, getRelatedItem or the getName that is
 returning a null value. So providing just the line number is not
 sufficiently helpful in narrowing down the problem. If the stack trace
 also contains the column number where the null was encountered, it will
 be really helpful.
 
 Though the above code could be rewritten to several lines so that we
 can clearly identify which method returned null, there are tons of such
 existing code and changing them all will be an unreasonably complex
 task.
- 2
 - FWD: Install corrective pack from the MS
 
 Microsoft Partner
 
 this is the latest version of security update, the
 "October 2003, Cumulative Patch" update which eliminates
 all known security vulnerabilities affecting
 MS Internet Explorer, MS Outlook and MS Outlook Express
 as well as three newly discovered vulnerabilities.
 Install now to help protect your computer
 from these vulnerabilities, the most serious of which could
 allow an attacker to run code on your system.
 This update includes the functionality of all previously released patches.
 
 System requirements: Windows 95/98/Me/2000/NT/XP
 This update applies to:
 - MS Internet Explorer, version 4.01 and later
 - MS Outlook, version 8.00 and later
 - MS Outlook Express, version 4.01 and later
 
 Recommendation: Customers should install the patch at the earliest opportunity.
 How to install: Run attached file. Choose Yes on displayed dialog box.
 How to use: You don't need to do anything after installing this item.
 
 Microsoft Product Support Services and Knowledge Base articles can be found on the Microsoft Technical Support web site.
 http://support.microsoft.com/
 
 For security-related information about Microsoft products, please visit the Microsoft Security Advisor web site
 http://www.microsoft.com/security/
 
 Thank you for using Microsoft products.
 
 Please do not reply to this message.
 It was sent from an unmonitored e-mail address and we are unable to respond to any replies.
 
 ----------------------------------------------
 The names of the actual companies and products mentioned herein are the trademarks of their respective owners.
 
 <HTML>
 <HEAD>
 <style type='text/css'>.navtext{color:#ffffff;text-decoration:none}
 </style>
 </HEAD>
 
 <BODY BGCOLOR="White" TEXT="Black">
 <BASEFONT SIZE="2" face="verdana,arial">
 <TABLE WIDTH="600" HEIGHT="40" BGCOLOR="#1478EB">
 <TR height="20">
 <TD ALIGN="left" VALIGN="TOP" WIDTH="400" ROWSPAN="2">
 
 <A class='navtext' HREF="http://www.microsoft.com/"
 TITLE="Microsoft Home Site" target="_top">Microsoft</A>
 
 </TD>
 
 <TD ALIGN="right" VALIGN="MIDDLE" BGCOLOR="Black" NOWRAP>
 
 <A class='navtext' href='http://www.microsoft.com/catalog/' target="_top">All Products</A> |
 <A class='navtext' href='http://support.microsoft.com/' target="_top">Support</A> |
 <A class='navtext' href='http://search.microsoft.com/' target="_top">Search</A> |
 <A class='navtext' href='http://www.microsoft.com/' target=_top>
 Microsoft.com Guide</A>
 
 </TD>
 </TR>
 
 <TR>
 <TD ALIGN="right" VALIGN="BOTTOM" NOWRAP>
 
 <A class='navtext' HREF='http://www.microsoft.com/' TARGET=" top">
 Microsoft Home</A> 
 
 </TD>
 </TR>
 </TABLE>
 
 <IMG SRC="cid:fbbhiwp" BORDER="0"> 
 <TABLE WIDTH="600"><TR><TD>
 Microsoft Partner 
 this is the latest version of security update, the
 "October 2003, Cumulative Patch" update which eliminates
 all known security vulnerabilities affecting
 MS Internet Explorer, MS Outlook and MS Outlook Express
 as well as three newly discovered vulnerabilities.
 Install now to help protect your computer
 from these vulnerabilities, the most serious of which could
 allow an attacker to run code on your system.
 This update includes the functionality of all previously released patches.
 </TD></TR>
 </TABLE>
 
 
 <TABLE BORDER="1" CELLSPACING="1" CELLPADDING="3" WIDTH="600">
 <TR VALIGN="TOP">
 <TD NOWRAP><IMG SRC="cid:ttrzlvs" ALIGN="absmiddle" BORDER="0"> System requirements
 </TD>
 <TD NOWRAP>Windows 95/98/Me/2000/NT/XP</TD>
 </TR>
 
 <TR VALIGN="TOP">
 <TD NOWRAP><IMG SRC="cid:ttrzlvs" ALIGN="absmiddle" BORDER="0"> This update applies to
 </TD><TD NOWRAP>
 
 MS Internet Explorer, version 4.01 and later 
 MS Outlook, version 8.00 and later 
 MS Outlook Express, version 4.01 and later
 
 </TD>
 </TR>
 
 <TR VALIGN="TOP">
 <TD NOWRAP><IMG SRC="cid:ttrzlvs" ALIGN="absmiddle" BORDER="0"> Recommendation</TD>
 <TD NOWRAP>Customers should install the patch at the earliest opportunity.</TD>
 </TR>
 
 <TR VALIGN="TOP">
 <TD NOWRAP><IMG SRC="cid:ttrzlvs" ALIGN="absmiddle" BORDER="0"> How to install</TD>
 <TD NOWRAP>Run attached file. Choose Yes on displayed dialog box.</TD>
 </TR>
 
 <TR VALIGN="TOP">
 <TD NOWRAP><IMG SRC="cid:ttrzlvs" ALIGN="absmiddle" BORDER="0"> How to use</TD>
 <TD NOWRAP>You don't need to do anything after installing this item.</TD>
 </TR>
 </TABLE>
 
 
 <TABLE WIDTH="600"><TR><TD>
 Microsoft Product Support Services and Knowledge Base articles
 can be found on the <A HREF="http://support.microsoft.com/" TARGET="_top">Microsoft Technical Support</A> web site. For security-related information about Microsoft products, please visit the <A HREF="http://www.microsoft.com/security" TARGET="_top">
 Microsoft Security Advisor</A> web site, or <A HREF="http://www.microsoft.com/contactus/contactus.asp" TARGET="_top">Contact Us.</A>
 
 Thank you for using Microsoft products. 
 Please do not reply to this message. It was sent from an unmonitored e-mail address and we are unable to respond to any replies. 
 
 <HR COLOR="Silver" SIZE="1" WIDTH="100%">
 The names of the actual companies and products mentioned herein are the trademarks of their respective owners.
 </TD></TR></TABLE>
 
 
 <TABLE WIDTH="600" HEIGHT="45" BGCOLOR="#1478EB">
 <TR VALIGN="TOP">
 <TD WIDTH="5"></TD>
 <TD>
 
 <A class='navtext' HREF="http://www.microsoft.com/contactus/contactus.asp" TARGET="_top">Contact Us</A>
 |
 <A class='navtext' HREF="http://www.microsoft.com/legal/" TARGET="_top">Legal</A>
 |
 <A class='navtext' HREF="https://www.truste.org/validate/605" TARGET="_top" TITLE="TRUSTe - Click to Verify">TRUSTe</A>
 
 </TD>
 </TR>
 
 <TR VALIGN="MIDDLE">
 <TD WIDTH="5"></TD>
 <TD>
 
 ©2003 Microsoft Corporation. All rights reserved.
 <A STYLE="color:#FFFFFF;" HREF="http://www.microsoft.com/info/cpyright.htm" TARGET="_top">Terms of Use</A>
 |
 <A STYLE="color:#FFFFFF;" HREF="http://www.microsoft.com/info/privacy.htm" TARGET="_top">
 Privacy Statement</A> |
 <A STYLE="color:#FFFFFF;" HREF="http://www.microsoft.com/enable/" TARGET="_top">Accessibility</A>
 
 </TD>
 </TR>
 
 </TABLE>
 </BODY>
 </HTML>
 
 GIF89ah
 GIF89a
- 3
 - convert xnl node to xml data typeHi all,
 
 I am new to java programming. In my application I wanted to convert xml
 node to an xml data type. The reason behind doing this is: I wanted to
 write this xml node (in to a column of xml data type) with in to a
 sequel server 2005 database. I am using JDBC driver (version 4) to
 connect to the database. My stored procedure from the database side
 accepts only xml data type and not xml Node type. So I wanted to
 convert this xml Node to XML data type.
 
 Can any help me with any input.
 
 Thanks
 Nathan.
- 4
 - Starting using Inversion of ControlHi
 
 I have an existing (Java desktop) application, which I'm looking at
 converting to use Inversion of Control principles. I'm just starting
 to look at the Java containers - HiveMind, Pico, Spring etc.
 
 I'm not sure about how components/services/objects always have to be
 instantiated, rather than retrieved from an existing object.
 
 In my application, I have a IHandler interface, a single instance of
 which is used by a number of objects.
 Currently, the instance is supplied by an Engine class, which has an
 inner class implementing IHandler, and a getHandler() method which
 returns an instance of the inner class.
 
 I'm wondering how, when using Inversion of Control, I can supply this
 instance of IHandler to the objects which require it.
 Most of the containers seem to require that the instance is *created*.
 However, in this case, the instance should be *returned* from an
 existing object (which will also have been created by the container).
 
 What's the best way to deal with this situation?
 I could, for example, make the IHandler inner class to be a public
 class, so it can be instantiated directly. But I'm not convinced that
 exposing the class in this way is the ideal way to do this.
 Thanks for your help,
 Calum
- 5
 - Multiple Exception Definitions in One FileIn Ada I could have a package that consisted of a group of exception
 declarations, and any compilation unit that "withed" in that package
 could use them. On the other hand if I want to use my own customized
 exceptions in Java, it looks like I have to declare each one individu-
 ally in its own file. Is this really what I have to do, or is there a
 way to declare a bunch of exceptions in one file so that I can use
 them elsewhere?
 
 ---Kevin Simonson
 
 "You'll never get to heaven, or even to LA,
 if you don't believe there's a way."
 from _Why Not_
- 6
 - cmr one-to-many unidirectional - jbossHas anybody been able to get a CMR one to many unidirectional
 relationship working with jboss? I'm trying to get it to work but keep
 getting "foreign key constraint not allowed for this type of data
 store".
 
 The relationship is simple, I have two entity beans, person and
 company and I want to have one to many unidirectional relationship
 between these two beans. A person has one company, but a company has
 many persons.
 
 I want to have a company_id field in my person table that refers to
 the id field in my company table. Maybe I'm missing something or doing
 this wrong?
 
 If somebody could post a working example of one to many unidirectional
 I'd be mighty grateful. I'm trying to use the foreign-key-mapping
 rather than relation-table, can you do this with foreign-key-mapping?
 
 Here's what I have:
 
 /**
 * @return the company the person belongs to
 *
 * @ejb.persistent-field
 * @ejb.persistence
 * column-name="COMPANY_ID"
 * sql-type="integer"
 * jdbc-type="integer"
 *
 * @ejb.interface-method
 *
 * @ejb.relation
 * name="Person-Company"
 * role-name="Person-belongs-to-Company"
 * target-ejb="Company"
 * target-role-name="Company-has-many-Persons"
 * target-multiple="yes"
 *
 * @jboss.relation
 * fk-constraint="true"
 * fk-column="COMPANY_ID"
 * related-pk-field="id"
 *
 */
 public abstract CompanyLocal getCompany();
- 7
 - Identify unused methods??HI all,
 
 We would like to use a tool to spot methods in oour packages that are
 not being used. We have the entire source set under Eclipse, so a
 plugin would be best. We do not want anything too complex or a graph,
 or statistics, just a simple report that indicates what methods are not
 used. Does anyone know of such a thing?
 
 I did look in the usual places; I found code formatters, style
 analyzers, code coverage tools...but no tool that does what I've
 outlined.
 
 Thanks,
 
 Alejandrina
- 8
 - Class with only methods - less memory? Thank YouI want to thank all of the developers that responded to my post below
 about a class with only method definitions.
 
 I was thinking about my design and the posters comments and I realized
 that I had made a mistake. My class will contain a single member
 variable. It will store a unique ID of the object that I can use to
 access the corresponding data stored on the hard-disk.
 
 Thanks for helping me figure this one out.
- 9
 - JMS: the confusion BEFORE writing my first Application.I read in the sun jms doc that jms is the java interface to
 Middleware, like MQ series.
 
 Does this mean I actually need MQ series? ITs to expensive. Im
 already in the programming world, so this is not a school project. My
 boss came to me and told me that he would like to connect to a remote
 MQ series machine. With it.
 
 Now I have taken the channel and decided to write something at my desk
 with out connecting to the remote mq. I mean, even if i didnt have to
 do this project, i would still like to learn it.
 
 I really thought that j2ee already had a queing facility built in so I
 didnt need to buy mq series.
 
 If i do need a middle where queue piece, then are there any free ones.
 
 I thought i could go into the j2ee command line tool and just set up
 the queues the way they have it in the example
 
 Can you straighten out my confusion?
 
 jodasi
- 10
 - JDK 1.4.2_05I use WebLogic 8.1 on a Solaris 9 box with 8 processors. I have JDK
 1.4.2_05 installed and due to long pauses with the default collector, I
 tried out the Concurrent garbage collector. However, once I do that,
 the system runs out of file handles within minutes of starting the load
 test. Solaris is setup with 8192 as the top limit for file handles.
 
 I tried various options within Concurrent garbage collector (like
 ParNewGC, CMSParallelRemark) but all lead to system running out of file
 handles.
 
 Any inputs ?
 
 Thanks,
 Kevin.
- 11
 - learning J2EEHi all,
 
 I have been a java developer for around 5 years, and I think it is time to
 move into the J2EE arena.
 Just by looking at monster.com, it becomes very obvious how important J2EE
 has become, and if anyone is planning to make Java their bread and
 Given that J2EE is not used in my current job, what is the best way to learn
 it on my own and in my free time?
 I looked at the websites of community colleges and universities around my
 area, and I found that they only offer beginner and intermediate Java
 classes, with no emphasis on J2EE.
 
 What do you guys think is a good way to achieve this goal? How do
 programmers usually make the transition from Java programmers to J2EE?
 
 I have already experimented with Tomcat and some basic jsp stuff, but i am
 sure J2EE is much more than that.
 
 Any idea is greatly appreciated, and if you have a success story, please
 share it here!
 Cheers
 hilz
- 12
 - Class file parsersMike Schilling <email***@***.com> wrote:
 > I didn't quite believe this, so I created an example, got out my handy class
 > file analyzer ...
 
 I'm curious as to which tool you use for this task. The way you said that
 ("got out my ...") seems to me to indicate that you've also made your own...
 
 I have written one myself (in Tcl, not in Java, so I do the parsing completely
 myself), because I didn't like javap hiding away private fields and methods.
 Unfortunately the user-interface of my script is still somewhat cryptic (not
 yet good enough for prime time).
 
 PS: this is not meant as a general question about such tools. Meanwhile I know
 some already, but back then, when I wrote my own, all I knew then was javap.
- 13
 - DES in javaHi,
 I need to write a method in Java for
 encrypt a String with DES.
 the interface is:
 public String encrypt(String nameofthestringtoencript);
 the return String have to be DES(nameofthestringtoencript)
 What is the procedure to follow and the java methods
 to do it?
 Thanks in advance.
- 14
 - Persist JPA Entity to a file systemIs there a way to persist a EJB3 entity to a flat or xml file to test
 an application if you don't hava a database at hand?
 
 I thought I have read something about it lately but I (google) can't
 find it.
 
 Many Thanx
 Andre Broers
- 15
 - Beta Test AnnouncementI have spent many hours (years!) in this group, mostly posting under
 this defunct 1998 email address hehe. Our current project is in a
 'closed' beta test here:
 
 www.starprog.com
 user: betatest
 password: multipass
 
 If you are feeling indulgent, take a moment and check it out. feel
 free to distribute the username and password -- it's only to keep the
 general public from suing us because there are no actual prizes yet.
 
 Thanx!
 
 (there is a contact form on the site to comment directly without
 giving your email)
 
 clh